What lubricant for window and latch parts?

[35 Ford]

I cleaned up the window regulator and door latch today. What lubricant should I use on the latch and the regulator? A spray silicone or a grease? None?

I plan on painting the parts as well. The regulator had paint on it before but the latch did not appear to have paint. I assume its ok to paint these parts?

Thanks!

[paul2748]

I use regular wheel bearing grease. I figure if it can stand up to wheel bearings, things like door latches and mechanisms are a breeze.

[Kurt in NJ]

I use spray white lithium --it is thinned, will penetrate, then the solvent evaporates leaving the grease ---that way it goes into the pivots and under the moving parts better

[51 MERC-CT]

Just a suggestion on painting. Consider using self etching primer as final color (does not have to be topcoated ). It leaves a satin finish and if you want a glossy finish, coat with Rustoleum clear lacquer.

[G.M.]

White Lubriplate was what was used in the 40s and 50s. G.M.

[Marv]

Sponsored Links (Register now to hide all advertisements)

I use Lubriplate also. Marv

[35 Ford]

Thanks for the suggestions fellows!