![]() |
What lubricant for window and latch parts? I cleaned up the window regulator and door latch today. What lubricant should I use on the latch and the regulator? A spray silicone or a grease? None?
I plan on painting the parts as well. The regulator had paint on it before but the latch did not appear to have paint. I assume its ok to paint these parts? Thanks! http://2.bp.blogspot.com/-FdIycDYz03...0/IMG_0903.jpg |
Re: What lubricant for window and latch parts? I use regular wheel bearing grease. I figure if it can stand up to wheel bearings, things like door latches and mechanisms are a breeze.
|
Re: What lubricant for window and latch parts? I use spray white lithium --it is thinned, will penetrate, then the solvent evaporates leaving the grease ---that way it goes into the pivots and under the moving parts better
|
Re: What lubricant for window and latch parts? 1 Attachment(s)
Just a suggestion on painting. Consider using self etching primer as final color (does not have to be topcoated ). It leaves a satin finish and if you want a glossy finish, coat with Rustoleum clear lacquer.
|
Re: What lubricant for window and latch parts? White Lubriplate was what was used in the 40s and 50s. G.M.
|
Re: What lubricant for window and latch parts? I use Lubriplate also. Marv
|
Re: What lubricant for window and latch parts? Thanks for the suggestions fellows!
|
All times are GMT -5. The time now is 10:26 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.