Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 12-18-2011, 09:04 PM   #1
flatout51
Junior Member
 
Join Date: Dec 2011
Posts: 12
Default Flathead Cam ID please!

I have a 59ab out of a 47 Ford coupe. The car was purchased in Texas in the late 70s early 80s by my cousin while in the Air Force. He drove the car a TON! From Mississippi to Missouri on a regular basis. After shelling the trans he sold the car to his brother who put a 302 c4 combo in it. He gave us the motor. When we pulled the heads we noticed the pistons were marked STD so they were obviously replace... further looking found the motor had been ported relieved and stroked with a merc 4 inch crank adjustable lifters with the lifter boss drilled for ease of adjustment and an aluminum timing gear! When we fired it up it ran amazing!!! The cam is far from stock!! Lopey! Runs super strong and revs faster than most smallblocks! The cams marked with a -T on one side and a F and what appears to be a 40 in a circle on the other... any help would be awesome! Here is a pic.
Attached Images
File Type: jpg cam2.jpg (78.1 KB, 84 views)
File Type: jpg cam1.jpg (79.7 KB, 65 views)
flatout51 is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 10:20 AM.