The Ford Barn

Heard · 08-06-2016, 07:01 PM

Some fool chopped off the rear most cross piece on my pickup chassis. What mounts to this rear piece?

Vanspeed · 08-06-2016, 08:33 PM

Rear body blocks for the bed.

bgarrett · 08-06-2016, 09:33 PM

Those cross pieces are weak and often damaged by people using them to attach chains for towing. This is your opportunity to use a better piece

Heard · 08-07-2016, 07:53 PM

Well, I think they left enough of it for the bed blocks because I removed them when I removed the bed. My truck did not have a rear bumper. I'm not sure I care about this, but does the rear bumper mount to this piece?

Vanspeed · 08-07-2016, 09:32 PM

No factory rear bumper on a 35.

Jakno · 08-08-2016, 06:50 AM

Sponsored Links (Register now to hide all advertisements)

Heard, just finishing my pickup body project and I noticed how weak this cross brace is alsol. Dropping the tailgate make this brace flex a lot. I don't have the floor boards in yet so that's not helping either. I think I'll add something to the existing brace to stiffen it up

Heard · 08-08-2016, 07:38 AM

Vanspeed...that answers my question about the bumper. Thanks!

Jakno...do you happen to have any pics of this thing?

JSeery · 08-08-2016, 08:05 AM

If you did mount a bumper it would mount to the main frame rails not the weak cross piece.

TJ · 08-08-2016, 08:43 AM

Not sure about a 35 pickup , but the 38 and up bumper brackets do bolt to the cross piece and frame rail. The inner iron bolts there. On the 35-36 passenger car the bracket for the bumper irons also bolts to the crosspiece. One side of the bracket bolts to the rear frame rail and the other side of the bracket to the crosspiece.

Karl Wescott · 08-08-2016, 08:50 AM

Reproduction of the rear crossmember is available:

Wescotts Auto.

JSeery · 08-08-2016, 08:55 AM

The frame diagram might be helpful, also from Wescotts.

JSeery · 08-08-2016, 08:57 AM

Quote:

Originally Posted by TJ

Not sure about a 35 pickup , but the 38 and up bumper brackets do bolt to the cross piece and frame rail. The inner iron bolts there. On the 35-36 passenger car the bracket for the bumper irons also bolts to the crosspiece. One side of the bracket bolts to the rear frame rail and the other side of the bracket to the crosspiece.

Yep, a little sloppy there. Should have said the "main" connection is to the frame rails. Thanks for the correction TJ

Heard · 08-08-2016, 04:15 PM

That's good stuff right there. Thanks!

Karl - I'm ordering one. Thanks!

Randy in ca · 08-08-2016, 06:00 PM

I have used the one from Wescott's - no problems, very good quality.

Jakno · 08-08-2016, 07:06 PM

Heard, I'll PM you a picture of my pickup rear cross member. Can't figure out how to do it on this version. Too many moving parts.

Jakno · 08-08-2016, 07:16 PM

Quote:

Originally Posted by Heard

Vanspeed...that answers my question about the bumper. Thanks!

Jakno...do you happen to have any pics of this thing?

Heard, attached is a picture of my tailgate attached to what I think is the cross member your referring too. It's pretty flimsy with the tailgate open but should be fine after I install the wood blocks underneath the bed floorboards.

The picture of the bolts is a misprint. My other name !.

Vanspeed · 08-08-2016, 08:03 PM

Are we talking about the bed rear crossmember or the frame? Thought we were talking about the rear frame crossmember.

V8COOPMAN · 08-09-2016, 12:40 PM

Quote:

Originally Posted by Vanspeed

Are we talking about the bed rear crossmember or the frame? Thought we were talking about the rear frame crossmember.

Heard is speaking of the FRAME's rear-most X-member........the wimpy one at the extreme rear. DD

Heard · 08-09-2016, 04:40 PM

Hey Jakno...yeah...I was talking about the frame cross member but thanks for your efforts. Now you know how to post some pics!!

08-06-2016, 07:01 PM	#1
Heard Senior Member Join Date: Sep 2013 Location: Florida Posts: 621	'35 pickup chassis Some fool chopped off the rear most cross piece on my pickup chassis. What mounts to this rear piece? __________________ Do I look like I have a plan B?

08-06-2016, 08:33 PM	#2
Vanspeed Senior Member Join Date: May 2010 Location: Suttons Bay, Mich. Posts: 3,444	Re: '35 pickup chassis Rear body blocks for the bed. __________________ *Respecting and Resurrecting Ford Model A's.*

08-06-2016, 09:33 PM	#3
bgarrett Senior Member Join Date: Jul 2010 Posts: 243	Re: '35 pickup chassis Those cross pieces are weak and often damaged by people using them to attach chains for towing. This is your opportunity to use a better piece

08-07-2016, 07:53 PM	#4
Heard Senior Member Join Date: Sep 2013 Location: Florida Posts: 621	Re: '35 pickup chassis Well, I think they left enough of it for the bed blocks because I removed them when I removed the bed. My truck did not have a rear bumper. I'm not sure I care about this, but does the rear bumper mount to this piece? __________________ Do I look like I have a plan B?

08-07-2016, 09:32 PM	#5
Vanspeed Senior Member Join Date: May 2010 Location: Suttons Bay, Mich. Posts: 3,444	Re: '35 pickup chassis No factory rear bumper on a 35. __________________ *Respecting and Resurrecting Ford Model A's.*

08-08-2016, 06:50 AM	#6
Jakno Senior Member Join Date: Sep 2014 Location: Maine Posts: 325	Re: '35 pickup chassis Sponsored Links (Register now to hide all advertisements) Heard, just finishing my pickup body project and I noticed how weak this cross brace is alsol. Dropping the tailgate make this brace flex a lot. I don't have the floor boards in yet so that's not helping either. I think I'll add something to the existing brace to stiffen it up __________________ Lineman, the only dumb animal that can harness himself !!

08-08-2016, 07:38 AM	#7
Heard Senior Member Join Date: Sep 2013 Location: Florida Posts: 621	Re: '35 pickup chassis Vanspeed...that answers my question about the bumper. Thanks! Jakno...do you happen to have any pics of this thing? __________________ Do I look like I have a plan B?

08-08-2016, 08:05 AM	#8
JSeery Member Emeritus Join Date: Nov 2012 Location: Wichita KS Posts: 16,132	Re: '35 pickup chassis If you did mount a bumper it would mount to the main frame rails not the weak cross piece.

08-08-2016, 08:43 AM	#9
TJ Senior Member Join Date: May 2010 Location: Napa,California Posts: 6,566	Re: '35 pickup chassis Not sure about a 35 pickup , but the 38 and up bumper brackets do bolt to the cross piece and frame rail. The inner iron bolts there. On the 35-36 passenger car the bracket for the bumper irons also bolts to the crosspiece. One side of the bracket bolts to the rear frame rail and the other side of the bracket to the crosspiece.

08-08-2016, 04:15 PM	#13
Heard Senior Member Join Date: Sep 2013 Location: Florida Posts: 621	Re: '35 pickup chassis That's good stuff right there. Thanks! Karl - I'm ordering one. Thanks! __________________ Do I look like I have a plan B?

08-08-2016, 06:00 PM	#14
Randy in ca Senior Member Join Date: May 2010 Posts: 1,816	Re: '35 pickup chassis I have used the one from Wescott's - no problems, very good quality.

08-08-2016, 07:06 PM	#15
Jakno Senior Member Join Date: Sep 2014 Location: Maine Posts: 325	Re: '35 pickup chassis Heard, I'll PM you a picture of my pickup rear cross member. Can't figure out how to do it on this version. Too many moving parts. __________________ Lineman, the only dumb animal that can harness himself !!

08-08-2016, 08:03 PM	#17
Vanspeed Senior Member Join Date: May 2010 Location: Suttons Bay, Mich. Posts: 3,444	Re: '35 pickup chassis Are we talking about the bed rear crossmember or the frame? Thought we were talking about the rear frame crossmember. __________________ *Respecting and Resurrecting Ford Model A's.*

08-09-2016, 04:40 PM	#19
Heard Senior Member Join Date: Sep 2013 Location: Florida Posts: 621	Re: '35 pickup chassis Hey Jakno...yeah...I was talking about the frame cross member but thanks for your efforts. Now you know how to post some pics!! __________________ Do I look like I have a plan B?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode