Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 08-08-2012, 08:59 AM   #1
335Bill
Junior Member
 
Join Date: Aug 2012
Posts: 2
Default Rear gravel deflector 6a-17808

Hi, new to the forum here. I am looking for the rear gravel deflector for a 48 coupe, and I need the center piece only. Help me out here?
335Bill is offline   Reply With Quote
Old 08-10-2012, 11:50 AM   #2
Fred A
Senior Member
 
Fred A's Avatar
 
Join Date: May 2010
Location: Encino California, near Burbank
Posts: 945
Default Posted in Wrong Section!

Since you have no location listed we don't know were you are anyway. Good Luck: Fred A
Fred A is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 08-10-2012, 03:43 PM   #3
dick lyons
Senior Member
 
dick lyons's Avatar
 
Join Date: Jul 2012
Location: middletown, delaware
Posts: 109
Default Re: Rear gravel deflector 6a-17808

my 48 coupe is one piece.
dick lyons is offline   Reply With Quote
Old 08-10-2012, 04:00 PM   #4
Bob G/Spanaway
Senior Member
 
Bob G/Spanaway's Avatar
 
Join Date: Sep 2011
Location: Spanaway, Washington
Posts: 344
Default Re: Rear gravel deflector 6a-17808

My '48 is three.
Bob G/Spanaway is offline   Reply With Quote
Old 08-10-2012, 07:54 PM   #5
FLA48
Senior Member
 
FLA48's Avatar
 
Join Date: Jul 2011
Location: Conroe TX
Posts: 170
Default Re: Rear gravel deflector 6a-17808

My '48 also has 3.
FLA48 is offline   Reply With Quote
Old 08-11-2012, 06:35 AM   #6
47Merc
Senior Member
 
Join Date: May 2010
Location: Australia
Posts: 362
Default Re: Rear gravel deflector 6a-17808

Sponsored Links (Register now to hide all advertisements)
C & G have them listed

https://secure435.hostgator.com/~dlv...3&g=297&t=1832
47Merc is offline   Reply With Quote
Old 08-17-2012, 08:52 PM   #7
al pa.
Senior Member
 
Join Date: May 2010
Location: pgh.pa.
Posts: 321
Default Re: Rear gravel deflector 6a-17808

Didn't look to see who sold the three piece,I have on my 47 merc.I installed the center piece first,and it looked good.The end pieces,did not match the fender contour,unless I moved them away from the center.This left a gap of about 1/2 inch between the center piece,and end pieces.I cut pieces of plastic trim,from home depot,1/2 inch thick,cut to length,carved and sanded to the top shape of the pan,marked for bolt the holes,and drilled.I had to paint with light coats to keep from affecting the plastic,but they almost look as they belong there.I may be the only person with a 5 piece gravel pan.
al pa. is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 06:54 PM.