29 coupe window crank handles install?

[zacryno]

so i just got a 29 coupe and am in process of replacing billet with original style stuff...i bought window handles from c w moss and the pins to secure but my posts on car are square with a slit cut not a round hole...any body help me with install....cw moss tech line ...couldnt get through to them on 3 attempts....any help and or pics will help

[Vanspeed]

The square with the slit is correct. Did you get the wrong handles? Factory handles have a square hole with a set bolt.

[zacryno]

im not sure if i got right handles ordered handles for 5 window coupe from cw moss the handles were vintiques theres no thread in handles ....may be ill thread then n use set screw

[zacryno]

do you have another supplier that may have better or correct handles?

[Vanspeed]

I got mine from Snyders.

[Dana Barlow]

Sponsored Links (Register now to hide all advertisements)

If u tape them your self,be sure to already have the set screws your going to use,try not to use fine thread=dose not hold as well

[329s]

Originally Posted by zacryno

do you have another supplier that may have better or correct handles?

You have the wrong handles...you need the handles with the set screw as described above...not the ones with the hole for the pins.

Got mine from Brattons.

Pluck