Radiator support rods- nuts & washers?

[Chris in WNC]

finding lots of missing/incorrect/incomplete fasteners on our new '29.

looking for an illustration and/or description of nuts and washers used on the rods at both ends.

is it in the Judging Standards somewhere?

[nkaminar]

Also see https://www.snydersantiqueauto.com/p...4017&cat=41737 and https://www.snydersantiqueauto.com/p...9152&cat=41737

[JayJay]

Originally Posted by nkaminar

Also see https://www.snydersantiqueauto.com/p...4017&cat=41737 and https://www.snydersantiqueauto.com/p...9152&cat=41737

FWIW, the repro rods I bought (I don't recall from where) were a larger diameter than the originals, and used different (although still SAE head size) nuts. I can be easily corrected, but the original rods may have been 1/4" and the repros maybe 13 mm?

[Gary WA]

Not in standards.front, rear

[Chris in WNC]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by Gary WA

Not in standards.front, rear

Thanks!!