The Ford Barn

JohnLaVoy · 05-04-2016, 02:41 PM

The RIMAC company made a tool for installing and removing the press in grease fittings for the Model A. It was #21 and called a "Nok-In-Out". Has anyone seen one or have one I could get a picture of?

rickblack · 11-24-2023, 06:40 PM

I think I have one. It's the only one I've seen in person.

Bigsnapper43 · 11-24-2023, 09:08 PM

I have seen this tool and didn't know what it was for.

Bob Bidonde · 11-25-2023, 08:19 AM

I am guessing that the RIMAC Tool tool is placed against a press-in grease fitting and then hit with a separate hammer. Doing so would avoid damaging a grease fitting from an errant-placed blow with the RIMAC Tool.

jwmckenzie · 11-25-2023, 10:58 AM

The tee handle end is likely the tool to insert them. I want one.....

ModelA29 · 11-25-2023, 06:19 PM

Sponsored Links (Register now to hide all advertisements)

https://www.ebay.com/itm/40431270225...Bk9SR76FoIyBYw

KR500 · 12-03-2023, 08:27 PM

My Avatar photo has that tool pictured. It was made by Rinck-McKilwaine of New York. You can usually find them hunting on EBay for Rimac tool or nail puller.

rickblack · 06-04-2025, 08:02 PM

I have one for sale.

katy · 06-05-2025, 10:12 AM

The link in post #6 doesn't work for me.

old31 · 06-05-2025, 11:54 AM

Link 6 can't work because it is too old. (like me)

katy · 06-06-2025, 10:13 AM

Tnx, never thought to check the date of the posting.

05-04-2016, 02:41 PM	#1
JohnLaVoy Senior Member Join Date: Jun 2014 Location: Rocklin, CA Posts: 779	RIMAC "Nok-In-Out" 21 The RIMAC company made a tool for installing and removing the press in grease fittings for the Model A. It was #21 and called a "Nok-In-Out". Has anyone seen one or have one I could get a picture of?

11-24-2023, 09:08 PM	#3
Bigsnapper43 Senior Member Join Date: Feb 2023 Posts: 158	Re: RIMAC "Nok-In-Out" 21 I have seen this tool and didn't know what it was for.

11-25-2023, 08:19 AM	#4
Bob Bidonde Senior Member Join Date: May 2010 Location: Long Island, NY Posts: 4,112	Re: RIMAC "Nok-In-Out" 21 I am guessing that the RIMAC Tool tool is placed against a press-in grease fitting and then hit with a separate hammer. Doing so would avoid damaging a grease fitting from an errant-placed blow with the RIMAC Tool. __________________ Bob Bidonde

11-25-2023, 10:58 AM	#5
jwmckenzie Senior Member Join Date: Feb 2014 Location: Boston, MA Posts: 232	Re: RIMAC "Nok-In-Out" 21 The tee handle end is likely the tool to insert them. I want one.....

12-03-2023, 08:27 PM	#7
KR500 Senior Member Join Date: Mar 2012 Location: Addison,ll. Posts: 454	Re: RIMAC "Nok-In-Out" 21 My Avatar photo has that tool pictured. It was made by Rinck-McKilwaine of New York. You can usually find them hunting on EBay for Rimac tool or nail puller.

11-24-2023, 06:40 PM	#2
rickblack Member Join Date: Aug 2010 Location: Las Cruces New Mexico Posts: 58	Re: RIMAC "Nok-In-Out" 21 I think I have one. It's the only one I've seen in person.

11-25-2023, 06:19 PM	#6
ModelA29 Senior Member Join Date: Sep 2022 Location: SoCal Posts: 1,152	Re: RIMAC "Nok-In-Out" 21 Sponsored Links (Register now to hide all advertisements) https://www.ebay.com/itm/40431270225...Bk9SR76FoIyBYw

06-04-2025, 08:02 PM	#8
rickblack Member Join Date: Aug 2010 Location: Las Cruces New Mexico Posts: 58	Re: RIMAC "Nok-In-Out" 21 I have one for sale.

06-05-2025, 10:12 AM	#9
katy Senior Member Join Date: Jun 2015 Location: Red Deer, Alberta Posts: 5,712	Re: RIMAC "Nok-In-Out" 21 The link in post #6 doesn't work for me. __________________ If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn!

06-05-2025, 11:54 AM	#10
old31 Senior Member Join Date: Jan 2016 Posts: 2,459	Re: RIMAC "Nok-In-Out" 21 Link 6 can't work because it is too old. (like me)

06-06-2025, 10:13 AM	#11
katy Senior Member Join Date: Jun 2015 Location: Red Deer, Alberta Posts: 5,712	Re: RIMAC "Nok-In-Out" 21 Tnx, never thought to check the date of the posting. __________________ If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn!