RIMAC "Nok-In-Out" 21
 

The RIMAC company made a tool for installing and removing the press in grease fittings for the Model A. It was #21 and called a "Nok-In-Out". Has anyone seen one or have one I could get a picture of?

Re: RIMAC "Nok-In-Out" 21
 

I think I have one. It's the only one I've seen in person. https://www.mafca.com/tools/Nok-In-Out.jpg

Re: RIMAC "Nok-In-Out" 21
 

I have seen this tool and didn't know what it was for.

Re: RIMAC "Nok-In-Out" 21
 

I am guessing that the RIMAC Tool tool is placed against a press-in grease fitting and then hit with a separate hammer. Doing so would avoid damaging a grease fitting from an errant-placed blow with the RIMAC Tool.

Re: RIMAC "Nok-In-Out" 21
 

The tee handle end is likely the tool to insert them. I want one.....

Re: RIMAC "Nok-In-Out" 21
 

Re: RIMAC "Nok-In-Out" 21
 

My Avatar photo has that tool pictured. It was made by Rinck-McKilwaine of New York. You can usually find them hunting on EBay for Rimac tool or nail puller.

Re: RIMAC "Nok-In-Out" 21
 

I have one for sale.

Re: RIMAC "Nok-In-Out" 21
 

The link in post #6 doesn't work for me.

Re: RIMAC "Nok-In-Out" 21
 

Link 6 can't work because it is too old. (like me)

Re: RIMAC "Nok-In-Out" 21
 

Tnx, never thought to check the date of the posting.