The Ford Barn

Shoebox · 08-24-2024, 08:22 AM

I know, kinda weird question but, after removing a broken off brass fitting I need to do some clean up on the block hole where the pressure sender goes in. Trying to measure the sender itself I'm looking at about 1/2 x12 but if someone could confirm I'd really appreciate. Thanks.

38 coupe · 08-24-2024, 09:12 AM

I think the thread is 1/4 pipe.

Shoebox · 08-24-2024, 09:18 AM

Quote:

Originally Posted by 38 coupe

I think the thread is 1/4 pipe.

That was the other thing, confirming it was pipe or straight.

glennpm · 08-24-2024, 09:18 AM

Quote:

Originally Posted by 38 coupe

I think the thread is 1/4 pipe.

It is a 1/4" NPT, national pipe thread.

.540" OD
1/4-18 tapered

Glenn

Shoebox · 08-24-2024, 10:00 AM

Sponsored Links (Register now to hide all advertisements)

Quote:

Originally Posted by glennpm

It is a 1/4" NPT, national pipe thread.

.540" OD
1/4-18 tapered

Glenn

THANKS Glenn for the specifics!

08-24-2024, 08:22 AM	#1
Shoebox Senior Member Join Date: Jan 2014 Location: Holmen,Wisconsin Posts: 983	Oil Pressure Sender Hole Size I know, kinda weird question but, after removing a broken off brass fitting I need to do some clean up on the block hole where the pressure sender goes in. Trying to measure the sender itself I'm looking at about 1/2 x12 but if someone could confirm I'd really appreciate. Thanks. __________________ I went, I saw, I bought the T shirt 51 Ford Deluxe Tudor 32 Ford roadster 39 Mercury Towncar

08-24-2024, 09:12 AM	#2
38 coupe Senior Member Join Date: May 2010 Location: South Texas Posts: 2,042	Re: Oil Pressure Sender Hole Size I think the thread is 1/4 pipe.