Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 06-29-2024, 04:21 PM   #1
fourfords
Senior Member
 
fourfords's Avatar
 
Join Date: May 2010
Location: Lake Elsinore, CA.
Posts: 476
Default 1933 Horn problem

Have checked everything I can with volt meter. Still no joy. Is there someone who can properly restore '33 6 Volt horns?

Thank you,

D. Stewart
Attached Images
File Type: jpg 1933 Ford 004 (2).jpg (106.5 KB, 76 views)
fourfords is offline   Reply With Quote
Old 06-29-2024, 07:46 PM   #2
petehoovie
Senior Member
 
petehoovie's Avatar
 
Join Date: May 2015
Posts: 10,158
Default Re: 1933 Horn problem

Quote:
Originally Posted by fourfords View Post
Have checked everything I can with volt meter. Still no joy. Is there someone who can properly restore '33 6 Volt horns?

Thank you,

D. Stewart
petehoovie is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 06-29-2024, 10:56 PM   #3
Newc
Senior Member
 
Newc's Avatar
 
Join Date: May 2010
Posts: 2,912
Default Re: 1933 Horn problem

I remember a high/low pitch to my '34 horns. Different sounds left/right. Newc
Newc is offline   Reply With Quote
Old 06-30-2024, 12:10 AM   #4
Lawrie
Senior Member
 
Lawrie's Avatar
 
Join Date: May 2010
Location: Qld, Australia
Posts: 4,529
Default Re: 1933 Horn problem

Yes, I had trouble getting them both to work , they would each work on the bench , and each separately on the car ,but not together, I fixed to by fitting a 6v relay to them and they have worked fine since.
Lawrie
Lawrie is offline   Reply With Quote
Old 06-30-2024, 07:45 PM   #5
koates
Senior Member
 
Join Date: May 2010
Location: Melbourne Australia.
Posts: 2,185
Default Re: 1933 Horn problem

Sponsored Links (Register now to hide all advertisements)
Forget your voltmeter tests. Do this testing. Disconnect the wires from both horns at the horns, you will need to remove the horn covers. Each horn requires two wires which you can connect to a separate good 6 volt car battery or directly around to the cars battery terminals. Use #12 or 10 gauge wire. What you are doing here is eliminating any problems with the cars horn wiring. Often voltage loss in the cars horn wiring will cause the horns to sound bad. The horns pull quite a large current (amps) so all wiring has to be in excellent condition. Sometimes a horn relay will solve the problem. Any voltage testing should be done at the horns when they are working. Regards, Kevin.
koates is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 03:00 PM.