The Ford Barn

johnbuckley · 01-06-2024, 04:11 AM

What was Fords original machining on the two shifter shafts? Were they both unramped. I've read (but never seen proof) that R/1 were ramped but 2/3 unramped. But many nowadays are both ramped. Did Ford change the machining of them if so when ?

Joe K · 01-06-2024, 05:25 PM

Sponsored Links (Register now to hide all advertisements)

Type 2 case transmission currently disassembled on my workbench (i.e. After 1927 but before July 1928) and NO ramps. Well, maybe "little teeny" triangles, at least one of which might be from wear.

https://www.fordgarage.com/pages/atransmissioncases.htm

Joe K

01-06-2024, 05:25 PM	#2
Joe K Senior Member Join Date: Jul 2010 Location: Cow Hampshire Posts: 4,611	Re: transmission shifter shafts - ramped or not? Sponsored Links (Register now to hide all advertisements) Type 2 case transmission currently disassembled on my workbench (i.e. After 1927 but before July 1928) and NO ramps. Well, maybe "little teeny" triangles, at least one of which might be from wear. https://www.fordgarage.com/pages/atransmissioncases.htm Joe K __________________ Shudda kept the horse.