|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: May 2022
Location: Lakeland Florida
Posts: 380
|
![]()
My 38 cs has 39 juice brakes…and 38 wooden floor boards!!
There are different part numbers for each year. Are the brake and clutch openings different between 38 and 39? Should I use 39 boards to accommodate the 39 clutch/brake pedals? As always, thank you in advance! Steve |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Dec 2022
Posts: 286
|
![]()
My 39 truck with juice brakes has no holes in the floor. Have to lift the whole floor or work from the underside.
__________________
I am building a 1939 1 ton express |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: Jan 2015
Posts: 392
|
![]()
we used 39 pedals on our 38 conv.-heated and bent to fit 38 floorboards, don't know if 38 and 39 are the same, mine had no floorboards, but I had a 38 pattern
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: May 2010
Location: Napa,California
Posts: 6,566
|
![]()
I suspect if you use the 39 boards you need to use the 39 standard boards.
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: May 2010
Location: Wisconsin, USA
Posts: 9,852
|
![]() Sponsored Links (Register now to hide all advertisements)
__________________
"I can explain it for you. However, I can't understand it for you". |
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|