Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-21-2020, 03:01 PM   #1
rrich1
Member
 
rrich1's Avatar
 
Join Date: Dec 2018
Location: Central Illinois
Posts: 70
Default Engine facelift

Over the past month I did a major engine facelift. I had a few leaks in the radiator and needed to remove it to get them fixed. With the radiator out it allowed me to get at the engine to clean and paint it without removing it. I removed all of the accessories and started to degrease the engine. I wanted to get the transmission done as well but just ran out of time and have other things I need to get done.

New parts included a lower coolant pipe, hoses, fan and miscellaneous hardware like manifold studs and exhaust clamp. Everything else was cleaned and painted. I'm extremely happy with how everything turned out.

The water pump had a piece break off at some point in it's life. It didn't cause any leaks. I repaired the crack and rebuilt it with a leak less kit from Brattons.


Sent from my Pixel 3 XL using Tapatalk

Last edited by rrich1; 03-21-2020 at 04:14 PM.
rrich1 is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:41 PM.