The Ford Barn

Neil Mylar LakewoodCA · 04-09-2018, 08:42 PM

Does anyone have the dimension of the rear body blocks on a 29 tudor.

I need to know the height (from frame to under side of body). I'm thinking it is around 1 and 1/2 inches high.

LWH would be nice too?

Thanks, Neil

Randy in ca · 04-10-2018, 05:51 PM

Neil, here's some dimension labelled pictures of the blocks I took a few years ago when somewhat else needed the info:

-

TZBrown · 04-10-2018, 07:20 PM

Those are good dimensions for the original 1929 blocks.

According to the service bulletins, July-August page 577 the length was increased to 6 inches, from 3 inches, with the angled cut portion increased to 4 1/8 from 1 1/4.

Neil Mylar LakewoodCA · 04-11-2018, 12:36 AM

Sponsored Links (Register now to hide all advertisements)

Thank you gentlemen!

04-09-2018, 08:42 PM	#1
Neil Mylar LakewoodCA Senior Member Join Date: May 2010 Location: Lakewood, CA Posts: 1,457	What is the dimention of the rear body block on a 29 tudor? Does anyone have the dimension of the rear body blocks on a 29 tudor. I need to know the height (from frame to under side of body). I'm thinking it is around 1 and 1/2 inches high. LWH would be nice too? Thanks, Neil Last edited by Neil Mylar LakewoodCA; 04-09-2018 at 08:48 PM. Reason: Spell check

04-10-2018, 07:20 PM	#3
TZBrown Member Join Date: Dec 2017 Location: Fenton Michigan Posts: 44	Re: What is the dimention of the rear body block on a 29 tudor? Those are good dimensions for the original 1929 blocks. According to the service bulletins, July-August page 577 the length was increased to 6 inches, from 3 inches, with the angled cut portion increased to 4 1/8 from 1 1/4.

04-11-2018, 12:36 AM	#4
Neil Mylar LakewoodCA Senior Member Join Date: May 2010 Location: Lakewood, CA Posts: 1,457	Re: What is the dimention of the rear body block on a 29 tudor? Sponsored Links (Register now to hide all advertisements) Thank you gentlemen!