The Ford Barn

Doug 845 · 02-11-2017, 01:48 PM

I figure out how to post my pics. Here are the pics for my oil pan removal.

trevo · 02-11-2017, 02:21 PM

Good on you I took my pan off in place was a pain!

Doug 845 · 02-12-2017, 07:04 AM

Can someone tell me if one of the gears in the oil pump is suppose to be lose like in my pic. When I took the screen cover off I discovered one bad screen and a lose gear. Also, by looking at the first pic, does it show the block to be a '33 / '34 versus a '35 / '36?

DavidG · 02-12-2017, 07:52 AM

Yes, one of the gears should be loose as it is held in place on its shaft by the bottom cover. Judging from your first photo you have a '33-'34 engine block.

Doug 845 · 02-12-2017, 12:43 PM

Thanks David. That is what I was hoping for in both cases.

whizzernick · 02-12-2017, 03:04 PM

Sponsored Links (Register now to hide all advertisements)

i notice on your last picture no tube in rear main . I have some eng that have it others dont . is it necessary ?

02-11-2017, 02:21 PM	#2
trevo Senior Member Join Date: Dec 2011 Location: Napier NZ Posts: 299	Re: 1934 Oil Pan Removal Good on you I took my pan off in place was a pain!

02-12-2017, 07:04 AM	#3
Doug 845 Senior Member Join Date: Feb 2012 Location: Fishkill, NY Posts: 180	Re: 1934 Oil Pan Removal Can someone tell me if one of the gears in the oil pump is suppose to be lose like in my pic. When I took the screen cover off I discovered one bad screen and a lose gear. Also, by looking at the first pic, does it show the block to be a '33 / '34 versus a '35 / '36?

02-12-2017, 07:52 AM	#4
DavidG Senior Member Join Date: May 2010 Location: southeastern Michigan Posts: 10,601	Re: 1934 Oil Pan Removal Yes, one of the gears should be loose as it is held in place on its shaft by the bottom cover. Judging from your first photo you have a '33-'34 engine block.

02-12-2017, 12:43 PM	#5
Doug 845 Senior Member Join Date: Feb 2012 Location: Fishkill, NY Posts: 180	Re: 1934 Oil Pan Removal Thanks David. That is what I was hoping for in both cases.

02-12-2017, 03:04 PM	#6
whizzernick Senior Member Join Date: Jul 2013 Location: Hayward Ca Posts: 635	Re: 1934 Oil Pan Removal Sponsored Links (Register now to hide all advertisements) i notice on your last picture no tube in rear main . I have some eng that have it others dont . is it necessary ?