1930 Cabriolet windshield hinge bolts

[kimeccles]

On a 1930 Cabriolet does the windshield hinge get screwed in from the bottom of the hinge into the weatherstrip into the top frame and if so do the round head bolts 1/4 diameter by 3/4 long have any special lockwashers?

thanks

[jw hash]

they are 1/4-20 X 5/8 slotted round head screws with a lock washer. and you are correct the screw goes through the hinge - rubber - and into the fixed nuts in the header.

[kimeccles]

Sponsored Links (Register now to hide all advertisements)

Thanks! Mine were rusty at the top because they were too long and real hard to get out. I will get new ones 5/8 and they should fit correctly.

Thanks again!