The Ford Barn

Steve Plucker · 02-09-2014, 09:46 PM

I have a small selection of Rear Brake Camshaft Levers, A-2235.

All the ones for the LEFT side are marked with a "L".

However there are some without any markings... I am guessing that these are for the Right side?

Did the Right levers have no markings to distinguish them from Right and Left?

Thanks.

Pluck

jw hash · 02-10-2014, 12:45 AM

Pluck
all the A-2235 and A-2236 I have seen, none of them are marked left or right, at times I wish they were, if you are not paying attention when you are putting them together you can get them on the wrong side however the emergency brake arms on the rear backing plate are marked R or L . John

RHD · 02-10-2014, 01:41 AM

I have only seen Rear Brake Camshaft Levers, A-2235 with a 'L'. never ever seen a 'R', although I have heard they do exist.

Gary Karr · 02-10-2014, 11:28 AM

On my E-28 rear levers, one has an "L" and the other a "R."

Midwest Tin · 02-10-2014, 11:59 AM

Hi,
I two sets of 31 NOS rear brake camshaft levers. One set has R and L and the other has LH and R. Interesting

d.j. moordigian · 02-10-2014, 12:10 PM

Sponsored Links (Register now to hide all advertisements)

Steve,

The ones I've looked at were marked.
If it's a good one...I'd use it....

jm29henry · 02-10-2014, 12:11 PM

This is really neat !!thanks for sharing this is a great note to put in your own reference book THANKS!!

marcshall · 02-10-2014, 04:23 PM

i put a set of them on my front brakes ,had to make bushings because the hole is bigger . works good more leverage

02-09-2014, 09:46 PM	#1
Steve Plucker BANNED Join Date: May 2010 Location: Walla Walla, Washington USA Posts: 6,066	Rear Brake Camshaft Lever ID... I have a small selection of Rear Brake Camshaft Levers, A-2235. All the ones for the LEFT side are marked with a "L". However there are some without any markings... I am guessing that these are for the Right side? Did the Right levers have no markings to distinguish them from Right and Left? Thanks. Pluck

02-10-2014, 12:45 AM	#2
jw hash Senior Member Join Date: May 2010 Location: Auburn Washington Posts: 2,662	Re: Rear Brake Camshaft Lever ID... Pluck all the A-2235 and A-2236 I have seen, none of them are marked left or right, at times I wish they were, if you are not paying attention when you are putting them together you can get them on the wrong side however the emergency brake arms on the rear backing plate are marked R or L . John

02-10-2014, 01:41 AM	#3
RHD Senior Member Join Date: Jan 2011 Location: New Zealand Posts: 677	Re: Rear Brake Camshaft Lever ID... I have only seen Rear Brake Camshaft Levers, A-2235 with a 'L'. never ever seen a 'R', although I have heard they do exist. __________________ R.H.D. Silence is golden unless you have kids, then silence is suspicious.

02-10-2014, 11:28 AM	#4
Gary Karr Senior Member Join Date: Jun 2010 Location: San Diego, CA Posts: 1,517	Re: Rear Brake Camshaft Lever ID... On my E-28 rear levers, one has an "L" and the other a "R."

02-10-2014, 12:10 PM	#6
d.j. moordigian Senior Member Join Date: May 2010 Location: Fresno, Ca. Posts: 3,636	Re: Rear Brake Camshaft Lever ID... Sponsored Links (Register now to hide all advertisements) Steve, The ones I've looked at were marked. If it's a good one...I'd use it....

02-10-2014, 12:11 PM	#7
jm29henry Senior Member Join Date: Sep 2010 Location: michigan Posts: 1,138	Re: Rear Brake Camshaft Lever ID... This is really neat !!thanks for sharing this is a great note to put in your own reference book THANKS!!

02-10-2014, 04:23 PM	#8
marcshall Member Join Date: May 2010 Location: duncan BC canada Posts: 63	Re: Rear Brake Camshaft Lever ID... i put a set of them on my front brakes ,had to make bushings because the hole is bigger . works good more leverage