The Ford Barn

FEO (UGLY) · 03-23-2013, 01:38 PM

1932-1937 complete ford flathead. needs rebuilt. dist. is not correct. asking $350.00 obo maybe be available to help with shipping call 702-249-1397

G32 · 03-24-2013, 12:53 AM

Handsome FEO
Pen engine down to 33/34(non ventilated) or 35/36(ventilated).
35/36 have 1.5" tube in rt front of valve chamber down thru eng to pan rail &
Zippo cig lghter size tin vent can below on rt front of oil pan.
Need more info re numbers on heads, etc. For a start to id. Main bearings
next if 1936.

Gene Tulsa

FEO (UGLY) · 03-30-2013, 03:56 PM

num. on back of block reads 160 24

Andy · 03-30-2013, 08:45 PM

Trans mount is 35-36. The pan is not 32-34 so probably also 35-36. It looks like a truck engine from the fan. I think the trans top changed in 36 so I call it a 35.

Barn Junk · 03-30-2013, 09:06 PM

Don't I see water pump cover plates on the block making it a 1937?? Also I see a somewhat valuable Stromberg carb.

G32 · 03-31-2013, 12:55 AM

Sponsored Links (Register now to hide all advertisements)

Feo
Per Barn man appears to be water pump in block 37/38 engine --confirm front block-off plates where pumps should mount.
Is running 36 & earlier water pump in heads. Distributor is correct for 37-41.
Probly in 35/36 auto or 1/2 t commercial-l trans is not truck best I see. Gene Tulsa

FEO (UGLY) · 04-01-2013, 11:58 PM

Sold

03-24-2013, 12:53 AM	#2
G32 Senior Member Join Date: May 2010 Posts: 258	Re: Flathead Handsome FEO Pen engine down to 33/34(non ventilated) or 35/36(ventilated). 35/36 have 1.5" tube in rt front of valve chamber down thru eng to pan rail & Zippo cig lghter size tin vent can below on rt front of oil pan. Need more info re numbers on heads, etc. For a start to id. Main bearings next if 1936. Gene Tulsa

03-30-2013, 03:56 PM	#3
FEO (UGLY) Junior Member Join Date: Apr 2011 Location: Henderson NV Posts: 19	Re: Flathead num. on back of block reads 160 24

03-30-2013, 08:45 PM	#4
Andy Senior Member Join Date: May 2010 Location: Kerrville, Tx Posts: 2,879	Re: Flathead Trans mount is 35-36. The pan is not 32-34 so probably also 35-36. It looks like a truck engine from the fan. I think the trans top changed in 36 so I call it a 35.

03-30-2013, 09:06 PM	#5
Barn Junk Senior Member Join Date: May 2010 Location: WA state Posts: 771	Re: Flathead Don't I see water pump cover plates on the block making it a 1937?? Also I see a somewhat valuable Stromberg carb.

03-31-2013, 12:55 AM	#6
G32 Senior Member Join Date: May 2010 Posts: 258	Re: Flathead Sponsored Links (Register now to hide all advertisements) Feo Per Barn man appears to be water pump in block 37/38 engine --confirm front block-off plates where pumps should mount. Is running 36 & earlier water pump in heads. Distributor is correct for 37-41. Probly in 35/36 auto or 1/2 t commercial-l trans is not truck best I see. Gene Tulsa

04-01-2013, 11:58 PM	#7
FEO (UGLY) Junior Member Join Date: Apr 2011 Location: Henderson NV Posts: 19	Re: Flathead Sold