The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (https://www.fordbarn.com/forum/forumdisplay.php?f=9)
-   -   Flathead (https://www.fordbarn.com/forum/showthread.php?t=101238)

FEO (UGLY) 03-23-2013 01:38 PM

Flathead
 
City: Henderson
State: nv
Price: 350.00

3 Attachment(s)
1932-1937 complete ford flathead. needs rebuilt. dist. is not correct. asking $350.00 obo maybe be available to help with shipping call 702-249-1397

G32 03-24-2013 12:53 AM

Re: Flathead
 

Handsome FEO
Pen engine down to 33/34(non ventilated) or 35/36(ventilated).
35/36 have 1.5" tube in rt front of valve chamber down thru eng to pan rail &
Zippo cig lghter size tin vent can below on rt front of oil pan.
Need more info re numbers on heads, etc. For a start to id. Main bearings
next if 1936.

Gene Tulsa

FEO (UGLY) 03-30-2013 03:56 PM

Re: Flathead
 

num. on back of block reads 160 24

Andy 03-30-2013 08:45 PM

Re: Flathead
 

Trans mount is 35-36. The pan is not 32-34 so probably also 35-36. It looks like a truck engine from the fan. I think the trans top changed in 36 so I call it a 35.

Barn Junk 03-30-2013 09:06 PM

Re: Flathead
 

Don't I see water pump cover plates on the block making it a 1937?? Also I see a somewhat valuable Stromberg carb.

G32 03-31-2013 12:55 AM

Re: Flathead
 

Feo
Per Barn man appears to be water pump in block 37/38 engine --confirm front block-off plates where pumps should mount.
Is running 36 & earlier water pump in heads. Distributor is correct for 37-41.
Probly in 35/36 auto or 1/2 t commercial-l trans is not truck best I see. Gene Tulsa

FEO (UGLY) 04-01-2013 11:58 PM

Re: Flathead
 

Sold


All times are GMT -5. The time now is 04:49 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.