The Ford Barn

Bruce/CT · 01-03-2022, 10:16 PM

Hi Barners,

I remember these two questions being discussed here some time ago but cannot remember the answer. I have tried to search here but with no luck.

#1. There are 2 bolt holes on the right and left sides in the bottom front frame cross member. A passenger car is bolted thru either the front two or the back two.
Which ones does a passenger car used?

#2. How does the radiator mounting bolts and springs attach? Above or below the frame?

I don't want to do this wrong and have to redo it.

Thanks in advance, Bruce/CT

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

01-03-2022, 10:16 PM	#1
Bruce/CT Senior Member Join Date: May 2010 Location: Middlebury, CT Posts: 782	1936 Radiator Bolting Position Hi Barners, I remember these two questions being discussed here some time ago but cannot remember the answer. I have tried to search here but with no luck. #1. There are 2 bolt holes on the right and left sides in the bottom front frame cross member. A passenger car is bolted thru either the front two or the back two. Which ones does a passenger car used? #2. How does the radiator mounting bolts and springs attach? Above or below the frame? I don't want to do this wrong and have to redo it. Thanks in advance, Bruce/CT __________________ Failure is simply the opportunity to begin again, this time more intelligently.......Henry Ford