1930 CCPU cab re-assembly

[Vin-tin]

I'VE ADDED AN UPDATE ON PAGE 2.
I've owned this cab (pile of parts) for a long time. Actually, my daughter was just 10 months old when I got it.
The cab's previous owner had torn it all apart with intentions of rebuilding it, but never did.
Well, my daughter graduated from college last year and I figured it was time I finally started to figure out how this model A goes back together.
I started with the sub rails. They were kind of rough. I welded the cracks and tig welded in new metal where needed.
Here's the rear section of the driver's side I fixed.