The Ford Barn

Robert1936 · 12-11-2015, 12:09 AM

Does anyone know of a source for a replacement chrome horn button retainer ring for a 36? Mine is not good enough to rechrome.
Thanks Robert1936

JM 35 Sedan · 12-11-2015, 05:06 AM

Check with "35fordtn" on this. He may have, or possibly know where you could get one.

Lawson Cox · 12-11-2015, 04:27 PM

I have one if I can find it. I'll look.

JM 35 Sedan · 12-11-2015, 06:51 PM

Quote:

Originally Posted by Lawson Cox

I have one if I can find it. I'll look.

I have complete '35/'36 horn button/light switch rod assemblies in very nice condition that could be for sale, BUT, there is no way I would remove and sell just the small ring that holds the horn button in place. Also, there is a good chance the small tabs, holding that ring in place, would break off if you try to remove the ring from an original assembly and attempt to recrimp those tabs. Don't ask me how I know about this

.

oldandtired · 12-12-2015, 08:36 AM

Robert...I believe I have a spare rechromed ring. pm me on Fordbarn or email me at
[email protected] and if you have not found another I will go check. As JM posted above the tabs can be an issue and I would have to check the tabs. My biggest problem with reassembling them is I do not have enough hands to hold the button down against the spring while recrimping the tabs.

Robert1936 · 01-04-2016, 11:04 PM

Sponsored Links (Register now to hide all advertisements)

THanks everyone for answering, I've found one that I can use.
Happy new year
Robert

VeryTangled · 01-04-2016, 11:55 PM

Well okay. There's another issue fixed. This time in about 12 hours.

Attaboy 'Barners!

12-11-2015, 12:09 AM	#1
Robert1936 Senior Member Join Date: May 2010 Location: Sydney, Australia Posts: 109	36 horn button Does anyone know of a source for a replacement chrome horn button retainer ring for a 36? Mine is not good enough to rechrome. Thanks Robert1936

12-11-2015, 05:06 AM	#2
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,876	Re: 36 horn button Check with "35fordtn" on this. He may have, or possibly know where you could get one. __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein*

12-11-2015, 04:27 PM	#3
Lawson Cox Senior Member Join Date: May 2010 Location: Above the gnat line in Georgia Posts: 7,082	Re: 36 horn button I have one if I can find it. I'll look. __________________ Life is like a roll of toilet paper. The closer to the end, the faster it goes. It is better to be seen, than viewed. "We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm".

12-12-2015, 08:36 AM	#5
oldandtired Senior Member Join Date: May 2010 Location: Edgefield, SC Posts: 829	Re: 36 horn button Robert...I believe I have a spare rechromed ring. pm me on Fordbarn or email me at [email protected] and if you have not found another I will go check. As JM posted above the tabs can be an issue and I would have to check the tabs. My biggest problem with reassembling them is I do not have enough hands to hold the button down against the spring while recrimping the tabs.

01-04-2016, 11:04 PM	#6
Robert1936 Senior Member Join Date: May 2010 Location: Sydney, Australia Posts: 109	Re: 36 horn button Sponsored Links (Register now to hide all advertisements) THanks everyone for answering, I've found one that I can use. Happy new year Robert

01-04-2016, 11:55 PM	#7
VeryTangled Senior Member Join Date: May 2010 Location: (Not far enough...) Outside of DC Posts: 3,395	Re: 36 horn button Well okay. There's another issue fixed. This time in about 12 hours. Attaboy 'Barners! __________________ -Jeff H Have you thought about supporting the Early Ford V-8 Foundation Museum?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode