The Ford Barn

Randy in ca · 08-19-2016, 01:22 AM

Can anyone give me a positive I.D. on these - I bought them quite a while ago, thinking the ones needed for my '35 3W would be the same as the Tudor - later found out they're apparently not the same and also that my Coupe used the very early style which are also quite a bit different again. Do these appear to be properly labelled as being for 1935-36 Tudor?

-

Don Rogers · 08-19-2016, 06:42 AM

Randy, Those channels look like 35/36 Tudor. I am enclosing images of both tudor and 3 window channels so you can compare dimensions. You might be able to modify the tudor channels to fit your 3 window.

Don

custom_lettering · 08-20-2016, 06:40 AM

Sponsored Links (Register now to hide all advertisements)

I had to get repops and they were for a tudor/3w. I had to cut it down to fit my 3w. I'd say if you cut it to the 26 1/16" like in Don Rogers pic you'd be good. Wish I had that pic when I was playing with it.

08-20-2016, 06:40 AM	#3
custom_lettering Member Join Date: Jun 2010 Location: NJ Posts: 50	Re: Window Channel I.D. Sponsored Links (Register now to hide all advertisements) I had to get repops and they were for a tudor/3w. I had to cut it down to fit my 3w. I'd say if you cut it to the 26 1/16" like in Don Rogers pic you'd be good. Wish I had that pic when I was playing with it. Last edited by custom_lettering; 08-21-2016 at 08:40 AM.