|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-07-2015, 05:12 PM | #1 |
Senior Member
Join Date: May 2010
Posts: 293
|
3psi poppet regulator
I mentioned in another thread I had these 'poppets' made set for 3psi, they don't look like a regulator and go anywhere after the pump and need to run back into the line from the tank. At 3psi they open fully and fuel flows in a loop, it keeps everything cool and would help those with vapor lock issues as well.
I'm not good with show and tell stuff, so... the 1st pic is the poppet, it is -6AN (3/8ths) the 2nd pic is a mockup showing everything, the poppet is wide open and returning fuel, the pump in my wetflow bench is a race duty 250gph holley, you'll never see the volume & pressure it makes and the poppet was at 4psi The next 2 pictures shows how I plumbed it into a SBC, it tees into the line going to the carb and returns to the line supplying the pump. This sbc will get triple two barrel 94's. I have a few more of these poppets, I had hope to find the old weaveloc hose and brass doubleflare crimped fittings to make a complete package but I keep coming up short on that stuff. Anyway, shoot me a PM if these will fit your need. Moderator, if I have crossed the line I apologize and please delete this thread. |
07-07-2015, 05:35 PM | #2 |
Senior Member
Join Date: Aug 2012
Location: Abq, NM
Posts: 3,607
|
Re: 3psi poppet regulator
That's great work you've done there.
|
Sponsored Links (Register now to hide all advertisements) |
|
07-08-2015, 07:27 AM | #3 |
Senior Member
Join Date: Feb 2012
Location: Tampa fl
Posts: 133
|
Re: 3psi poppet regulator
I'm interested, how much?
|
07-08-2015, 08:01 AM | #4 |
Senior Member
Join Date: May 2010
Posts: 293
|
Re: 3psi poppet regulator
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|