measurements for A 180 body only

[Epetek1]

can anyone give me the dimensions, width at bottom and width at top. I have purchased a body only in CA and am having it shipped east and need to 1- know these dimensions to see whether it will fit in pickup and 2- any ideas on how best and cheapest to ship?
This is body only and weighs about 400 lbs I think. Email me at epetek1@gmail or respond here. Thanks for any help. pete

[foxfire42]

Here's a start. Any additional measurements you wish? These should be close enough to determine fit in a pickup.

Body width at widest point by the top irons 51" +/-
Body width just in front of the dash rail 47" +/-
Height at recessed rear floor to top of body 30" +/-
Length from back to front including cowl 88"
Width across bottom at cowl 40"
Width across bottom at rear of door 44"

Barb

[Mike V. Florida]

[BRENT in 10-uh-C]

Umm don't use Mikes picture of a 35B Phaeton above or you will have all kinds of variations!!

[foxfire42]

What's the "Ooops" about? I measured my 180A

[BRENT in 10-uh-C]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by foxfire42

What's the "Ooops" about? I measured my 180A

He posted a picture of a Phaeton, ...just a "more-door" Phaeton and not a 180. He changed the picture.

[Mike V. Florida]

Some people don't read all the posts so I did not want to have someone save it incorrectly. Big mistake in the body style so big oops!

[Roadster62]

I'd check the open door width on a Ford or Chevy van, rent one, and drive it home. I know a 26-27 T Touring will fit inside an E350. Ford. Bob

Originally Posted by foxfire42

Here's a start. Any additional measurements you wish? These should be close enough to determine fit in a pickup.

Body width at widest point by the top irons 51" +/-
Body width just in front of the dash rail 47" +/-
Height at recessed rear floor to top of body 30" +/-
Length from back to front including cowl 88"
Width across bottom at cowl 40"
Width across bottom at rear of door 44"

Barb