The Ford Barn

51 MERC-CT · 05-31-2019, 09:14 AM

Quote:

Originally Posted by 19Fordy

Is there an alloy of stainless bolts that would be ok to use?
Seems like maintaining your coolant at the correct Ph is very important too.

As stated grade 5 bolts and steel lock washers (not stainless)
If it makes you feel more comfortable, paint them with a coat of non-hardening Permatex after installation.

Ol' Ron · 05-31-2019, 10:34 PM

I often wonder who the people are that have joined the Flathead group. You're getting an education in automotive mechanics. People with out a mechanical back ground might have some trouble getting a hang on some of the methods necessary to accomplish a simple task. However, The more you work on these things the more you'll learn and that will help you in other areas. Putting that bolt in the water pump, is probably the easiest think you'll do. Just wait till you get to the valves.

richard crow · 06-01-2019, 07:38 AM

flathead fever i guess you don,t check the gap on the plugs before installing if you did you would have noticed it had no threads

5851a · 06-01-2019, 10:52 AM

A short 6 point socket is a handy tool to have and short extension. Along with leaving everything untightened until the last bolt is home.

supereal · 06-01-2019, 02:19 PM

We use a stainless bolt from a local hardware store. No need to buy a special bolt from a vendor. If the original bolt is rusty or corroded, you can bet that is true of the entire water jacket, and means the coolant is past due for a change. We recommend a bottle of rust inhibitor be added to the system annually. It is available whereever anti freeze is sold.

chap52 · 06-01-2019, 04:54 PM

Sponsored Links (Register now to hide all advertisements)

Might be able to align holes with outer bolts loose by using a stubby phillips screwdriver. I use a piece of masking tape on the bolt head instead of the brown paper. Chap

05-31-2019, 10:34 PM	#22
Ol' Ron Senior Member Join Date: May 2010 Location: Chester Vt Posts: 8,860	Re: Bolt inside water pump I often wonder who the people are that have joined the Flathead group. You're getting an education in automotive mechanics. People with out a mechanical back ground might have some trouble getting a hang on some of the methods necessary to accomplish a simple task. However, The more you work on these things the more you'll learn and that will help you in other areas. Putting that bolt in the water pump, is probably the easiest think you'll do. Just wait till you get to the valves.

06-01-2019, 07:38 AM	#23
richard crow Senior Member Join Date: May 2010 Posts: 1,770	Re: Bolt inside water pump flathead fever i guess you don,t check the gap on the plugs before installing if you did you would have noticed it had no threads

06-01-2019, 10:52 AM	#24
5851a Senior Member Join Date: Oct 2014 Location: NE Iowa Posts: 1,664	Re: Bolt inside water pump A short 6 point socket is a handy tool to have and short extension. Along with leaving everything untightened until the last bolt is home.

06-01-2019, 02:19 PM	#25
supereal Senior Member Join Date: Jul 2014 Location: Iowa Posts: 1,634	Re: Bolt inside water pump We use a stainless bolt from a local hardware store. No need to buy a special bolt from a vendor. If the original bolt is rusty or corroded, you can bet that is true of the entire water jacket, and means the coolant is past due for a change. We recommend a bottle of rust inhibitor be added to the system annually. It is available whereever anti freeze is sold.

06-01-2019, 04:54 PM	#26
chap52 Senior Member Join Date: Jun 2013 Location: Marana Arizona Posts: 1,776	Re: Bolt inside water pump Sponsored Links (Register now to hide all advertisements) Might be able to align holes with outer bolts loose by using a stubby phillips screwdriver. I use a piece of masking tape on the bolt head instead of the brown paper. Chap