|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-24-2018, 10:57 AM | #21 |
Senior Member
Join Date: Sep 2014
Location: Portland, OR
Posts: 171
|
Re: How rare is an "August" spare tire cover for 1936 ?
This is all great stuff, thank you guys.
My hunt continues but I am enjoying reading all of these comments. |
09-24-2018, 06:24 PM | #22 |
Senior Member
Join Date: May 2012
Location: In the shop
Posts: 359
|
Re: How rare is an "August" spare tire cover for 1936 ?
This one was going to go on my 33 phaeton I didn’t know it is a sought after part
__________________
Wanted Roadster Pick up thank you COLOR] |
Sponsored Links (Register now to hide all advertisements) |
|
09-24-2018, 11:33 PM | #23 |
Senior Member
Join Date: Jul 2010
Location: NorCal
Posts: 252
|
Re: How rare is an "August" spare tire cover for 1936 ?
I understood from years of collecting the "standard' cover that they were the ones used on commercial vehicles such as panels and pickups in 36 and 37 and maybe even 38 & 39. Any thoughts from more knowledgable enthusiasts?
|
09-25-2018, 11:01 AM | #24 |
Senior Member
Join Date: May 2010
Location: Wildwood, MO. (near St. Louis)
Posts: 1,792
|
Re: How rare is an "August" spare tire cover for 1936 ?
This is the Standard cover that most people refer to on panels and pickups.
|
09-25-2018, 12:31 PM | #25 | |
Senior Member
Join Date: Jul 2010
Location: Ventura, CA
Posts: 2,464
|
Re: How rare is an "August" spare tire cover for 1936 ?
Quote:
Don, From the attached pix you will note that I have at least two extra '36 tire covers, the 'common' style and an August one. Both of the tire covers are in excellent shape, the August cover has original paint, which is near perfect. Common cover has excellent original blue paint on the back side and badly worn paint on the front side. I have made mention about the condition of the covers because had they show signs of damage or repair, measurements might not be accurate. The OD of the common cover is... 27.5" The OD of the August cover is.... 26-7/8" Reviewing the two covers side by side I noted that the covers have a completely different amount of 'dish' which would position the covers differently on the wheel/tire, that would explain the long lock extension built into the tire mount. The larger common cover could indicate that it was made to accommodate the 600 x 16 and 650 x 16 tires.
__________________
Bill.... 36 5 win cpe |
|
09-25-2018, 01:23 PM | #26 |
Senior Member
Join Date: Jul 2010
Location: Ventura, CA
Posts: 2,464
|
Re: How rare is an "August" spare tire cover for 1936 ?
Sponsored Links (Register now to hide all advertisements)
While putting the covers away I noted that the common cover seemed to be much heavier than the August cover, I got out the scales. The common cover weighed 9.5 lbs, the August cover weighed 6.5 lbs. A significant difference. Could be the weight savings was the main reason for redesigning the tire covers so late in the model run. I wonder? Has anyone ever seen an official Ford document that states that the August cover is only to be used on Standard cars. Ya know there are so many myths that become reputed facts due to the years they have been around. The myth surrounding the "ping" noise the ammo clip for the M1 rifle makes when ejected from the breach, which reputedly cost a lot of lives during WWII comes to mind..
__________________
Bill.... 36 5 win cpe |
09-25-2018, 01:29 PM | #27 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,101
|
Re: How rare is an "August" spare tire cover for 1936 ?
I guess you missed Don's reference in post #17 to the two Ford engineering drawings regarding the later cover. Those are hard to beat when it comes to documentation.
|
09-26-2018, 10:07 AM | #28 | |
Senior Member
Join Date: Jul 2010
Location: Ventura, CA
Posts: 2,464
|
Re: How rare is an "August" spare tire cover for 1936 ?
Quote:
I did not miss Don's comment in #17 about the "engineering drawings", my question was regarding an actual document which stated that the August cover (68-1395-E) was only meant to be used on Standard cars.
__________________
Bill.... 36 5 win cpe |
|
09-26-2018, 01:16 PM | #29 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,101
|
Re: How rare is an "August" spare tire cover for 1936 ?
It would have been on the drawing, which is a Ford Motor Company "actual drawing" of the period. Your comment suggests that you are not familiar with such drawings. If you are ever in the Dearborn area, you may wish to visit the Benson Ford Research Center to become familiar with such documents and their contents. Another document type that would you would likely find informative would be the Engineering Release forms which compliment the drawings with information regarding the timing and application of parts released for production and use.
Don has spent endless hours at the BFRC studying the information available therein such as the blueprint drawings he referred to in #17 and acquiring a library of that information. |
09-26-2018, 01:25 PM | #30 |
Senior Member
Join Date: May 2010
Location: Wisconsin, USA
Posts: 9,007
|
Re: How rare is an "August" spare tire cover for 1936 ?
Bill (Blucar),
In addition to what Dave has rightfully allowed, a visit to the Benson Ford Research Center is at minimum fascinating! It doesn't take too long to understand (for the most part) how Ford "did things" and with that knowledge, you will be quickly amazed at how much is there for the learning. During the years I've been researching for my book (1940 Ford) I have spent quite a bit of time there. My biggest personal issue, is just how easy it is for me to "stray" from my original intended research project to a zillion other things. Yep, there is THAT much to be discovered. Fascinating place... simply fascinating.
__________________
"I can explain it for you. However, I can't understand it for you". |
09-26-2018, 01:42 PM | #31 | |
Senior Member
Join Date: Jul 2011
Location: SF Bay Area
Posts: 6,645
|
Re: How rare is an "August" spare tire cover for 1936 ?
Quote:
__________________
Alan |
|
09-26-2018, 02:28 PM | #32 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,101
|
Re: How rare is an "August" spare tire cover for 1936 ?
Now, now, Alan......
|
09-26-2018, 05:55 PM | #33 |
Senior Member
Join Date: May 2010
Location: Wildwood, MO. (near St. Louis)
Posts: 1,792
|
Re: How rare is an "August" spare tire cover for 1936 ?
BluCar, Here is a portion of the title block of the 68-1395-E drawing that specifies what the cover is to be used for. Hope this helps.
Don |
09-28-2018, 12:55 PM | #34 |
Senior Member
Join Date: Jul 2010
Location: Ventura, CA
Posts: 2,464
|
Re: How rare is an "August" spare tire cover for 1936 ?
Since the engineering drawing copy which Don attached to his most recent comment, where-in it clearly states that the 68-1395-E tire cover is intended to fit the 550 x 16 tire, then it can be assumed that it is intended for use on Standard Model vehicles.
The anomaly to the subject is the cover being on my '36 Deluxe coupe which I bought from the original owner in 1952. The original owner was a teacher at a Jr. High school that I attended in Eastern Idaho through the ninth grade. I can clearly recall the '36 sitting on the street adjacent to the school during the three years I attended that school. I gave up showing my '36 at EFV8 meets over twenty-five years ago. Prior to that time I was never challenged for having an incorrect tire cover on the car, could have been because nobody knew what they were looking at.
__________________
Bill.... 36 5 win cpe |
09-28-2018, 02:37 PM | #35 | |
Senior Member
Join Date: May 2010
Location: Wisconsin, USA
Posts: 9,007
|
Re: How rare is an "August" spare tire cover for 1936 ?
Quote:
I have been working on a "new" restoration manual for 1940 Fords for a number of years now. I can tell you that from that personal experience how little I really knew just tens years ago. Keep in mind ten years ago, my cars were being scrutinized and awarded 997+ points. Now those same cars, judged against what I have documented would not fare as well. MUCH of what was considered "correct" just back then has been clearly disproven by me due to this research. This entire "correct" thing is ever evolving. I know I've taken some poopy as to how long I've been working on my project and realize there will come a point wherein I must simply accept that "this is it". Still, my quest to get all details correct drives me onward. Just when I thought I knew....
__________________
"I can explain it for you. However, I can't understand it for you". |
|
09-29-2018, 01:06 PM | #36 |
Senior Member
Join Date: Jul 2010
Location: Ventura, CA
Posts: 2,464
|
Re: How rare is an "August" spare tire cover for 1936 ?
Kube,
I understand completely what you are saying, there was a time many years ago that cars like my '36 were highly frowned on by the purests because it had hydraulic brakes, a '59 AB engine with speed equipment and a column gearshift, and prior to 1960 '37 Desoto bumpers. Things started to change by the late 1960's, early '70's, hydraulic brakes and speed equipment became acceptable on mainstream cars. Using the term "mainstream cars" I am referring to cars that were drivers, not show cars. The last EFV8 Club sanctioned car show I entered my '36 in was held in the early '70's in Oxnard CA. My car took the trophy for the most popular in it's class. Still have the trophy sitting on a shelf in my garage. My car getting the trophy created a big uproar among the other entrants in my class. One man in particular was very outspoken. He had a very nice dead stock, highly restored gray '36 5 win cpe. It was very obvious that the gray '36 was restored with mostly aftermarket parts, of rather poor quality. The judges finally stopped the argument by telling everyone they should take a close look at my '36, in doing so they would find that the car had it's original upholstery, original Ford glass, original trim and accessories. Original paint on the cowl and door jambs. Yes it had a 59AB engine and a column shift, however, the mechanical aspects were still all Ford. My only concern about the August tire cover is that I know the cover will fit perfectly on a 600 x 16 tire, I also know that it came on my car when it was new, which was in August, 1936, that is why I refer to the cover as being a August cover in lieu of a Standard cover. I find it to be quite interesting that the content of this thread has brought to light the fact the in all probability there are TWO COMMON '36 TIRE COVERS, one for the 600 x 16 and one for the 650 x 16 tire..
__________________
Bill.... 36 5 win cpe |
09-29-2018, 03:40 PM | #37 | |
Senior Member
Join Date: May 2010
Location: Wisconsin, USA
Posts: 9,007
|
Re: How rare is an "August" spare tire cover for 1936 ?
Quote:
__________________
"I can explain it for you. However, I can't understand it for you". |
|
09-29-2018, 04:18 PM | #38 |
Senior Member
Join Date: May 2010
Location: (Not far enough...) Outside of DC
Posts: 3,387
|
Re: How rare is an "August" spare tire cover for 1936 ?
Taking a left turn here... One of the things I will never forget is getting the opportunity to use my '36 Phaeton as a 'taxi' for Don Rogers and Gene Napoliello. We went from the Benson Ford Research Center to the meet hotel this past Grand National Meet.
Because they don't really allow camera stands or flash, in the BFRC, that pic of the engineering drawing was done free-hand! Impressive... I hope Don will forgive me for posting the photo. On the subject of the spare tire cover. I'm about 100% certain that none of us were there on the day the original owner picked up a vehicle from the dealer... So, from day #2, what could be changed, could be changed. That's just my take. Also the two tire options are 6.00x16 and 5.50x16. Or apparently Ford called it a 16 x 5.50.
__________________
-Jeff H Have you thought about supporting the Early Ford V-8 Foundation Museum? Last edited by VeryTangled; 09-29-2018 at 04:40 PM. Reason: Forgot to add photo |
09-29-2018, 05:31 PM | #39 |
Senior Member
Join Date: May 2010
Location: (Not far enough...) Outside of DC
Posts: 3,387
|
Re: How rare is an "August" spare tire cover for 1936 ?
Nice...
__________________
-Jeff H Have you thought about supporting the Early Ford V-8 Foundation Museum? |
09-29-2018, 05:34 PM | #40 |
Senior Member
Join Date: May 2010
Location: (Not far enough...) Outside of DC
Posts: 3,387
|
Re: How rare is an "August" spare tire cover for 1936 ?
As a EFV-8 Deputy Judge for 36 and sometimes 35, I'd agree that we're just volunteers and not always experts.
__________________
-Jeff H Have you thought about supporting the Early Ford V-8 Foundation Museum? |
|
|
Sponsored Links (Register now to hide all advertisements) |
|