The Ford Barn

mightynova63 · 06-10-2018, 11:19 PM

I have a 1928 sport coupe that I'm trying to get running. I 99.9% sure on the timing 99.9% on the carb I rebuild and I have good compression. I replaced the oil pump drive gear that was extremely worn, installed an updated pionts system and rebuilt the carb. The motor is spitting and sputtering but won't kick over. The head is getting warm and the plugs are kinda dry. It has plenty of turning power with the 12v upgrade. Right now I'm leaning that the carb is not feeding the right fuel flow or the coil is not powerful enough. Any help will be great.

Sent from my SM-G930V using Tapatalk

06-10-2018, 11:19 PM	#1
mightynova63 Junior Member Join Date: Apr 2018 Location: sf bay area Posts: 22	Motor won't run I have a 1928 sport coupe that I'm trying to get running. I 99.9% sure on the timing 99.9% on the carb I rebuild and I have good compression. I replaced the oil pump drive gear that was extremely worn, installed an updated pionts system and rebuilt the carb. The motor is spitting and sputtering but won't kick over. The head is getting warm and the plugs are kinda dry. It has plenty of turning power with the 12v upgrade. Right now I'm leaning that the carb is not feeding the right fuel flow or the coil is not powerful enough. Any help will be great. Sent from my SM-G930V using Tapatalk