The Ford Barn

steve-cook · 10-31-2011, 07:45 PM

Will a 1947 1/2 ton ford truck hub/drum fit a 39-47 ford banjo backing plate?

car banjo

rich b · 10-31-2011, 09:13 PM

Should fit OK. '47 1/2 ton still used Lockheed brakes like the passenger cars.

steve-cook · 10-31-2011, 09:25 PM

That is great news thanks.

I never knew the brakes were made by lockheed

ford38v8 · 10-31-2011, 09:48 PM

Sponsored Links (Register now to hide all advertisements)

Steve, I'm not sure they were made by Lockheed, but they are of the Lockheed TYPE brakes. The Later brakes, '49 & up, are Bendix type.

10-31-2011, 07:45 PM	#1
steve-cook Member Join Date: May 2010 Location: Garner, NC Posts: 87	hub/drum fit Will a 1947 1/2 ton ford truck hub/drum fit a 39-47 ford banjo backing plate? car banjo Last edited by steve-cook; 10-31-2011 at 08:00 PM. Reason: clairify

10-31-2011, 09:13 PM	#2
rich b Senior Member Join Date: May 2010 Location: Minnesota Posts: 1,826	Re: hub/drum fit Should fit OK. '47 1/2 ton still used Lockheed brakes like the passenger cars.

10-31-2011, 09:25 PM	#3
steve-cook Member Join Date: May 2010 Location: Garner, NC Posts: 87	Re: hub/drum fit That is great news thanks. I never knew the brakes were made by lockheed

10-31-2011, 09:48 PM	#4
ford38v8 Senior Member Join Date: Jul 2011 Location: SF Bay Area Posts: 6,645	Re: hub/drum fit Sponsored Links (Register now to hide all advertisements) Steve, I'm not sure they were made by Lockheed, but they are of the Lockheed TYPE brakes. The Later brakes, '49 & up, are Bendix type. __________________ Alan