11-16-2020, 05:16 PM | #1 |
Senior Member
Join Date: Jan 2016
Posts: 2,098
|
35 condenser
This is the condenser I took out of my 35 Roadster.
Does anyone know what the NAPA part number is? I would like to pick one up tomorrow. |
11-16-2020, 05:35 PM | #2 |
Senior Member
Join Date: Aug 2010
Location: McMinnville, TN
Posts: 2,327
|
Re: 35 condenser
You must have a remote coil adapter plate. If you chose Napa go with a FA54. We sell the FA54 for $8.59. It will look different than the one you are currently using but is ideal for the Early Ford dual point distributors
|
Sponsored Links (Register now to hide all advertisements) |
|
11-16-2020, 05:48 PM | #3 |
Senior Member
Join Date: May 2010
Location: Qld, Australia
Posts: 4,215
|
Re: 35 condenser
Sponsored Links (Register now to hide all advertisements)
What you do is put a 3/16 did screw in through the hole where the original condenser was , use a spacer and a lug for a spade type connection, then put a spade type end on the condenser wire , and mount the condenser onto a little mount onto the top bolt on the timing cover, then its a nice looking installation, AND if you have to change one on the road its an easy job. Lawrie |
|
|
Sponsored Links (Register now to hide all advertisements) |
|