Pictures please

[Blu Dice]

Those of you that have alternator conversions on your later flatheads I would like to see your set-ups please.

[51 MERC-CT]

Originally Posted by Blu Dice

Those of you that have alternator conversions on your later flatheads I would like to see your set-ups please.

This is what I did on mine.

[JSeery]

Here's mine

[V8COOPMAN]

An interesting picture of a double-shieve alt pulley on a flathead that I came across somewhere on the www. DD

[34PKUP]

Originally Posted by JSeery

Here's mine

Doesn't look like a "later" flathead to me

[Heard]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by V8COOPMAN

An interesting picture of a double-shieve alt pulley on a flathead that I came across somewhere on the www. DD

That's a pretty cool setup right there.

[JSeery]

Originally Posted by 34PKUP

Doesn't look like a "later" flathead to me

Yep, your correct, it's a 1948 59a engine with a custom built alternator. The fan is late flathead, does that count?

[Fordestes]

I noticed the waterpump with the later top hole or are my eyes playing tricks, neat setup though. are the alt. pullies comercially produced or will it have to be specially made?

[Blu Dice]

I should have added I would like to see 1 wire alternator conversions on later flatheads please.
51 Merc that's a cool adjuster set up.

[ct1932ford]

Here is my one wire alternator inside generator case with fake cut out and wires.

[Tony, NY]

Chrysler Alt from the '60s. Modified gen bracket.

[john worden]

Hope this helps.

[Lawson Cox]

Holy excrement.

[Thaplumbr]

That's slick!!!!very nice!

[Blu Dice]

I would like to see pictures of the ones offered by Mac's, Speedway Motors and others please. My car is a basic driver - not a show car - so no need for chrome and other thrills - thanks.

[Drbrown]

Nothing exciting here .... '47 stock(ish) + with 3-wire 10SI Delco on standard adapter using two-shieve crank pulley.

[johnh7]

Here is what mine looks like on my 38 pickup. It is a one wire made to look something like an old generator. it works great.

[Talkwrench]

Mine , nothing great here just standard ol' SI 10 3 wire. Typical only charges above idle.. But its never been a problem. I use my pickup daily.

[19Fordy]

Here's a one wire GM alternator on an 8BA. Aluminum alternator bracket was cut down to make alternator sit lower down on the engine. There is also a fusibale link in the wire that goes from the battery terminal to the back of the alternator.

[Ross F-1]

I bought my horseshoe and 10Si from Certified Electric. Pretty stout, but I found it was vibrating fore-aft at certain RPM's. I added some stiffening ribs to the horseshoe, cured that. It has been totally trouble free electrically.