Emergency Brake Retracting Spring

[solidirish]

How is this installed? Pictures would also help. Thank you.
Ray in Illinous

[JerMar]

Are you talking about the springs on the back of the backing plate that goes on before each arm?

[solidirish]

The spring on the back or the rear backing plate that's on the emergency brake actuating arm. I have tried to do this in connection with doing a complete brake rebuilding job.

[Chuck Sea/Tac]

Go to search and put in E brake return springs again
I'd pull it up , but not sure how. It was posted in may this year. Pics of right and left.

[solidirish]

Thanks. I did search and pics were great and Snyders Web site with link to Les Andrews article & other approaches also very helpful.

[Chuck Sea/Tac]

Sponsored Links (Register now to hide all advertisements)

It's a booger to put on. I've seen some special hooks ect, and read of some tips, but don't know from where.

[wmws]

I just put a string around it and pull. Very easy.

[JerMar]

Yep string worked great!!

[Vin-tin]

I just used coat hanger wire with a small hook bent on the end.

[BILL WILLIAMSON]

Originally Posted by Vin-tin

I just used coat hanger wire with a small hook bent on the end.

WHAT in the world will we do, when WIRE hangers become OBSOLETE??? We'll even have to BUY Welding Rod
Bill Cheep

[100IH]

Bill Williamson, you took the hangers right out of my closet....... mouth!

[Barry B./ Ma.]

Think of the fools that threw buckets of them away in the trash.