|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-03-2020, 09:07 PM | #1 |
Junior Member
Join Date: Feb 2012
Posts: 3
|
1932 ford windshield
im trying to install the windshield so it sits flush. right now the bottom sticks out.
|
02-03-2020, 09:25 PM | #2 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,101
|
Re: 1932 ford windshield
What body type and is the frame plated or painted? Also, is the frame original or a reproduction? There's quite a variety of frames, hinges, and attachments in the various '32 bodies.
|
Sponsored Links (Register now to hide all advertisements) |
|
02-03-2020, 09:33 PM | #3 |
Junior Member
Join Date: Feb 2012
Posts: 3
|
Re: 1932 ford windshield
32 ford 3 window coupe, chrome frame aftermarket, original body
|
02-03-2020, 10:42 PM | #4 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,101
|
Re: 1932 ford windshield
Does the frame fit the opening in the body well unattached to the hinges?
|
02-04-2020, 12:38 PM | #5 |
Senior Member
Join Date: May 2010
Location: Oregon
Posts: 1,289
|
Re: 1932 ford windshield
Try this (you will need two helpers):
1. per David, check the fit of the frame to the body without hinges and swing arms. 2. Install hinges loosely. 3. Install swing arms, and lock down. 4. Have the two helpers (from the outside of the car) put gentle pressure on the frame so the gasket is evenly seated top and bottom and both sides. (fix swing arms if necessary) Then tighten the hinge bolts, frame first then to the body. In theory the gasket will now seat with the frame closed and the swing arms locked. Last edited by Karl Wescott; 02-04-2020 at 12:59 PM. |
02-04-2020, 01:21 PM | #6 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,101
|
Re: 1932 ford windshield
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|