The Ford Barn

redmodelt · 10-13-2016, 12:38 PM

We are trying to set the value on the 33-36 style water inlet motor mounts. Think the part number is 68-6031 and 68-6030. If you don't want to post send me a PM. I looked on what has been sold on ebay in the past and all I could find was the gaskets. Don't find any numbers on the ones we have and have a customer that is looking for a pair. Model T and A parts we are ok with but the V8 stuff...

Thanks
MarkG

Don Rogers · 10-13-2016, 01:59 PM

$25 to $50 a pair depending on condition

DavidG · 10-13-2016, 02:58 PM

Those 68-prefix water inlet/motor mount brackets are '36 only.

V8ER · 10-13-2016, 03:10 PM

'34, '35 and '36 water inlets/motor mounts are all different. You need to determine which you have. Can you post a picture?

redmodelt · 10-13-2016, 03:21 PM

Yes I will upload some tonight. The guy that is looking has a 36 so he is using those numbers. I did find the numbers D20 and J40 on the back. The "Green Book" only shows so much.

Mac VP · 10-13-2016, 07:22 PM

Sponsored Links (Register now to hide all advertisements)

I have one or maybe two sets of the 68- mounts. One set has virtually no corrosion on the outlets. Shoot me a PM or email if you still need a set.

redmodelt · 10-13-2016, 08:44 PM

Here is what we have. Sorry about the color. Red primed on tan cardboard and the flood lights give a red hue!

Brian · 10-13-2016, 08:54 PM

Those are 34 model

DavidG · 10-13-2016, 09:11 PM

And all but very early '33.

lotsagas4u · 10-13-2016, 09:25 PM

http://www.ebay.com/itm/1933-1934-Fo...hX5aWW&vxp=mtr

Here is a set

Charlie ny · 10-14-2016, 05:49 AM

Red,
I have all 3 types: '33/'34.... '35 which has the decided dog leg, and also used in '36 trucks and the '36 style.. I machine 1 inch off of the neck ( usually pretty corroded anyway ) and bore the water hole at the correct angle and press in a
shouldered sleeve. This makes a proper repair in my estimation. My preference is to
apply a liberal coat of epoxy to the sleeve prior to pressing it into the mount. Ready
to go and painted Ford green. $75 per pair plus shipping.
Charlie ny

10-13-2016, 12:38 PM	#1
redmodelt Senior Member Join Date: May 2010 Location: Portland OR Posts: 6,342	V8 33-36 water inlet motor mount value question We are trying to set the value on the 33-36 style water inlet motor mounts. Think the part number is 68-6031 and 68-6030. If you don't want to post send me a PM. I looked on what has been sold on ebay in the past and all I could find was the gaskets. Don't find any numbers on the ones we have and have a customer that is looking for a pair. Model T and A parts we are ok with but the V8 stuff... Thanks MarkG

10-13-2016, 01:59 PM	#2
Don Rogers Senior Member Join Date: May 2010 Location: Wildwood, MO. (near St. Louis) Posts: 1,792	Re: V8 33-36 water inlet motor mount value question $25 to $50 a pair depending on condition

10-13-2016, 02:58 PM	#3
DavidG Senior Member Join Date: May 2010 Location: southeastern Michigan Posts: 10,104	Re: V8 33-36 water inlet motor mount value question Those 68-prefix water inlet/motor mount brackets are '36 only.

10-13-2016, 03:10 PM	#4
V8ER Senior Member Join Date: May 2010 Location: near Pittsburgh, PA Posts: 403	Re: V8 33-36 water inlet motor mount value question '34, '35 and '36 water inlets/motor mounts are all different. You need to determine which you have. Can you post a picture?

10-13-2016, 03:21 PM	#5
redmodelt Senior Member Join Date: May 2010 Location: Portland OR Posts: 6,342	Re: V8 33-36 water inlet motor mount value question Yes I will upload some tonight. The guy that is looking has a 36 so he is using those numbers. I did find the numbers D20 and J40 on the back. The "Green Book" only shows so much.

10-13-2016, 07:22 PM	#6
Mac VP Senior Member Join Date: May 2010 Location: Cincinnati, OH Posts: 1,361	Re: V8 33-36 water inlet motor mount value question Sponsored Links (Register now to hide all advertisements) I have one or maybe two sets of the 68- mounts. One set has virtually no corrosion on the outlets. Shoot me a PM or email if you still need a set. __________________ VANPELT SALES LLC Cincinnati, Ohio Office: 513-724-9486 www.vanpeltsales.com www.classictransmission.com

10-13-2016, 08:54 PM	#8
Brian Senior Member Join Date: May 2010 Location: Masterton, New Zealand Posts: 3,836	Re: V8 33-36 water inlet motor mount value question Those are 34 model __________________ Unfortunately, two half wits don't make a whole wit!

10-13-2016, 09:11 PM	#9
DavidG Senior Member Join Date: May 2010 Location: southeastern Michigan Posts: 10,104	Re: V8 33-36 water inlet motor mount value question And all but very early '33.

10-13-2016, 09:25 PM	#10
lotsagas4u Senior Member Join Date: Apr 2011 Location: Plainview, Texas Posts: 757	Re: V8 33-36 water inlet motor mount value question http://www.ebay.com/itm/1933-1934-Fo...hX5aWW&vxp=mtr Here is a set

10-14-2016, 05:49 AM	#11
Charlie ny BANNED Join Date: May 2010 Posts: 3,019	Re: V8 33-36 water inlet motor mount value question Red, I have all 3 types: '33/'34.... '35 which has the decided dog leg, and also used in '36 trucks and the '36 style.. I machine 1 inch off of the neck ( usually pretty corroded anyway ) and bore the water hole at the correct angle and press in a shouldered sleeve. This makes a proper repair in my estimation. My preference is to apply a liberal coat of epoxy to the sleeve prior to pressing it into the mount. Ready to go and painted Ford green. $75 per pair plus shipping. Charlie ny