|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-20-2017, 09:29 AM | #1 |
Member
Join Date: Nov 2014
Location: Morristown, NJ
Posts: 43
|
Replacement shifting forks?
Hi all,
Thanks for your continued advice and guidance. Very helpful to have your experience and expertise. I'm rebuilding the transmission tower and just found out the hard way that none of the parts suppliers I'm aware of carry replacement shifting forks. I'm not skilled enough to weld/repair them myself. Does anyone know of a source for new replacement forks, or a company that will refurbish? I've attached a picture of the old forks for your thoughts on how badly worn they are. Given the rebuild, I'd rather not reuse the forks as-is unless they're in good shape (I don't have the benefit of experience as this is my first restoration). Thanks for any advice/insight you might have. Last edited by pklarkin; 02-20-2017 at 09:50 AM. Reason: Adding a second picture |
|
|
Sponsored Links (Register now to hide all advertisements) |
|