The Ford Barn

ntqlvr · 07-27-2010, 02:13 PM

How hard is it to change the gear on the camshaft with the engine in place? I know it is straight forward but is the gear nut hard to remove?
thanks in advance.

Patrick L. · 07-27-2010, 02:18 PM

It's not hard to remove if you have the correct socket..

Bruce of MN · 07-27-2010, 02:38 PM

Or the right cold chisel

TK in LA · 07-27-2010, 03:26 PM

Sponsored Links (Register now to hide all advertisements)

Put it on TDC before removing the gear!

07-27-2010, 02:13 PM	#1
ntqlvr Member Join Date: May 2010 Posts: 54	Timing gear, camshaft How hard is it to change the gear on the camshaft with the engine in place? I know it is straight forward but is the gear nut hard to remove? thanks in advance.

07-27-2010, 02:18 PM	#2
Patrick L. Senior Member Join Date: May 2010 Location: Largo Florida Posts: 7,225	Re: Timing gear, camshaft It's not hard to remove if you have the correct socket..

07-27-2010, 02:38 PM	#3
Bruce of MN Senior Member Join Date: May 2010 Location: VA Posts: 1,412	Re: Timing gear, camshaft Or the right cold chisel

07-27-2010, 03:26 PM	#4
TK in LA Senior Member Join Date: May 2010 Location: La Verne, Ca. Posts: 827	Re: Timing gear, camshaft Sponsored Links (Register now to hide all advertisements) Put it on TDC before removing the gear!