|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-28-2021, 09:43 AM | #1 |
Senior Member
Join Date: Jan 2016
Location: Manila, Philippines
Posts: 119
|
7 Tooth Steering box question/request
Hello All-
Lacking a parts diagram or "exploded" view illustration, may I ask exactly what goes inside the 7 teeth steering box (except the steering shaft and worm, which is present, and works fine) ? What I have out of the steering box so far is the 7 teeth Sector gear, and the Sector Thrust washer. I assume of course that there would be some kind of bushing/bushings in the box ( where the long end of the Sector shaft inserts through ). Is that it, or did I leave out any other part ? I have the cover with the adjusting screw as well ( sector thrust screw I believe ). I can't seem to find a diagram showing the bits and pieces inside. Maybe someone can please provide me with an "exploded" parts view of what and how the little parts interact with each other, like what goes where. Thank you ! Patrick |
06-28-2021, 09:57 AM | #2 |
Senior Member
Join Date: Apr 2018
Location: Mebane NC
Posts: 2,359
|
Re: 7 Tooth Steering box question/request
Here is the diagram Bratton's uses:
https://www.brattons.com/media/catal...chematic_1.jpg The index of diagram numbers to Bratton's part names and numbers appears at the bottom of this page: https://www.brattons.com/assemblies/...-assembly.html |
Sponsored Links (Register now to hide all advertisements) |
|
06-28-2021, 10:00 AM | #3 |
Senior Member
Join Date: Jun 2015
Location: Red Deer, Alberta
Posts: 5,046
|
Re: 7 Tooth Steering box question/request
__________________
If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn! |
06-28-2021, 10:47 PM | #4 |
Senior Member
Join Date: Jan 2016
Location: Manila, Philippines
Posts: 119
|
Re: 7 Tooth Steering box question/request
ALEXISKAI & KATY -
Thank you both for the parts assembly diagram. Big help for sure. Just can't identify part #1, is it a lock (circlip ) ?? I've seen this picture/parts list page from Brattons, but totally missed the diagram... Patrick Last edited by patrickt; 06-28-2021 at 10:52 PM. Reason: changed a letter |
06-28-2021, 10:51 PM | #5 |
Senior Member
Join Date: Jan 2016
Location: Manila, Philippines
Posts: 119
|
Re: 7 Tooth Steering box question/request
ALEXISKAI & KATY,
Thanks to you both for this diagram. A big help for sure. Just not sure what part #1 is ? A lock (circlip ) ?? Patrick |
06-28-2021, 10:55 PM | #6 |
Senior Member
Join Date: Jan 2016
Location: Manila, Philippines
Posts: 119
|
Re: 7 Tooth Steering box question/request
Sponsored Links (Register now to hide all advertisements)
Last edited by patrickt; 06-28-2021 at 10:56 PM. Reason: adjustments |
06-29-2021, 06:05 AM | #7 |
Senior Member
Join Date: Apr 2018
Location: Mebane NC
Posts: 2,359
|
Re: 7 Tooth Steering box question/request
Part #1 is an O-ring.
|
06-29-2021, 07:11 AM | #8 |
Senior Member
Join Date: Jan 2016
Location: Manila, Philippines
Posts: 119
|
Re: 7 Tooth Steering box question/request
ALEXISKAI-
Thanks ! I can likely source one over here. |
06-29-2021, 07:33 AM | #9 |
Senior Member
Join Date: May 2010
Location: Rhode Island
Posts: 649
|
Re: 7 Tooth Steering box question/request
|
06-29-2021, 08:22 AM | #10 |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,521
|
Re: 7 Tooth Steering box question/request
Well, not necessarily. While it is definitely better to chamfer the edge of the housing with a large countersink tool, you can also press the sector bushing into the housing by 0.030 - 0.040 further, and this gives a small counterbore for the 0-ring to seat into.
|
06-29-2021, 01:33 PM | #11 |
Senior Member
Join Date: May 2010
Location: Rhode Island
Posts: 649
|
Re: 7 Tooth Steering box question/request
Oh, I wish I knew that when I rebuilt my box
|
06-29-2021, 01:52 PM | #12 |
Senior Member
Join Date: Apr 2018
Location: Mebane NC
Posts: 2,359
|
Re: 7 Tooth Steering box question/request
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|