|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
Thread Tools | Display Modes |
03-29-2005, 12:21 PM
|
#1 |
|
Guest
Posts: n/a
|
Distributor and timing gear cover
Can I use a 59a timing gear cover on a 85hp block? I want to use a 2 bolt distributor on it. thanks |
|
03-29-2005, 12:59 PM
|
#2 |
|
Guest
Posts: n/a
|
Re: Distributor and timing gear cover
yes BUT you will have to overcome distance.32-41 has a cam with a extended nose to reach shorter 32-41 3 bolt distributor .The 42-48 2 bolt dist is longer and will not touch the later cover as dist will be against cam .Easiest way is to use 3 bolt cover with a "bolt on" 3 to 2 adapter which is right thickness to fit cam & dist. |
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
03-30-2005, 12:06 AM
|
#3 |
|
Guest
Posts: n/a
|
Re: Distributor and timing gear cover
You used to see those aluminum spacers plates, about 1/4in. thick for that purpose. I haven't seen them advertized lately. Does anyone know where to bye one? Walt |
|
03-30-2005, 03:00 AM
|
#4 |
|
Guest
Posts: n/a
|
Re: Distributor and timing gear cover
some one on here a while back said they were still availible. posibly C& C cal. ken ct. |
|
03-30-2005, 04:05 AM
|
#5 |
|
Guest
Posts: n/a
|
Re: Distributor and timing gear cover
Sponsored Links (Register now to hide all advertisements)
Yes, Remund ignitions has them as does C&G |
«
Previous Thread
|
Next Thread
»
Linear Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 02:23 AM.