The Ford Barn

alanwoodieman · 07-22-2022, 12:20 PM

acquired a Crane Cam for an 8ba style motor and was wondering if any body knew about it and the specs. Crane 388 is stamped in the end

KiWinUS · 07-22-2022, 04:07 PM

I have a Crane NOS kit for a flathead but can’t remember the number. I will check in the morning if it’s a 388. If so I can copy cam card for you. Cheers.

Ol' Ron · 07-23-2022, 08:24 AM

Measure the lift, that takes about 10 seconds with a digital caliper then if it's 330 or less it a short duration cam 350 mediun 375 or more long duration. this isn't 100%, but will givr you some idea what you have

KiWinUS · 07-23-2022, 08:54 AM

My Crane flathead cam is a 353-2
See attached timing card.

tubman · 07-23-2022, 10:15 AM

Maybe the "388" is the lift. According to "Ol' Ron"'s criteria, that should make it pretty wild.

alanwoodieman · 08-01-2022, 12:37 PM

Sponsored Links (Register now to hide all advertisements)

been off the site for a week, thanks for the info. will check on the lift tomorrow

07-22-2022, 12:20 PM	#1
alanwoodieman Senior Member Join Date: May 2010 Location: upstate SC Posts: 2,964	Crane Cam 388 acquired a Crane Cam for an 8ba style motor and was wondering if any body knew about it and the specs. Crane 388 is stamped in the end

07-22-2022, 04:07 PM	#2
KiWinUS Senior Member Join Date: May 2010 Location: Charlotte NC KiWi-L100 available here Posts: 2,963	Re: Crane Cam 388 I have a Crane NOS kit for a flathead but can’t remember the number. I will check in the morning if it’s a 388. If so I can copy cam card for you. Cheers.

07-23-2022, 08:24 AM	#3
Ol' Ron Senior Member Join Date: May 2010 Location: Chester Vt Posts: 8,860	Re: Crane Cam 388 Measure the lift, that takes about 10 seconds with a digital caliper then if it's 330 or less it a short duration cam 350 mediun 375 or more long duration. this isn't 100%, but will givr you some idea what you have

07-23-2022, 10:15 AM	#5
tubman Senior Member Join Date: Dec 2013 Location: Minnesota, Florida Keys Posts: 10,319	Re: Crane Cam 388 Maybe the "388" is the lift. According to "Ol' Ron"'s criteria, that should make it pretty wild.

08-01-2022, 12:37 PM	#6
alanwoodieman Senior Member Join Date: May 2010 Location: upstate SC Posts: 2,964	Re: Crane Cam 388 Sponsored Links (Register now to hide all advertisements) been off the site for a week, thanks for the info. will check on the lift tomorrow