|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-29-2016, 09:00 AM | #1 |
Senior Member
Join Date: Jan 2014
Location: Davenport, IA
Posts: 169
|
Putting driver's door glass back in
I got my goor glass on Friday and am now trying to get it back in the door. I can't seem to get the roller on the front regulator to start in its track so I must be doing something wrong.
What I am trying to do is start the roller in the front edge of the track. I lower the regulator to the point that the front roller is in front of the track and then I try and pull back on the spring loaded part of the roller with my two fingers and my thumb behind the roller. When I try to move the roller in the end of the track my finger is in the way so all of a sudden I lose that and then the roller won't go in the track. Is there a better way to do this? Thanks,
__________________
Dwayne |
05-29-2016, 09:11 AM | #2 |
Senior Member
Join Date: Feb 2011
Location: Arlington, Texas
Posts: 379
|
Re: Putting driver's door glass back in
Don't know for sure the car your working on. On my old 36 I wedged the glass with a couple of rubber for stops. Moved the regulator to it. Got it all set the eased the regulator and glass back into line for the regulator holes and set it.
|
Sponsored Links (Register now to hide all advertisements) |
|
05-29-2016, 09:17 AM | #3 | |
Senior Member
Join Date: Jan 2014
Location: Davenport, IA
Posts: 169
|
Re: Putting driver's door glass back in
Quote:
Did you put the regulator in through the end? Thanks again.
__________________
Dwayne |
|
05-29-2016, 09:47 AM | #4 |
Senior Member
Join Date: Jan 2012
Location: Nine Mile Falls,WA
Posts: 900
|
Re: Putting driver's door glass back in
When I did my 48 F1 I took the glass and put it in and then pushed it up and had someone hold it there while I moved raiser up enough to marry up with the bottom of the glass.
__________________
The sign of a good craftsman is how well they cover up their mistakes. |
05-29-2016, 09:58 AM | #5 |
Senior Member
Join Date: Jan 2014
Location: Davenport, IA
Posts: 169
|
Re: Putting driver's door glass back in
Sponsored Links (Register now to hide all advertisements)
I did it by lowering the regulator enough to wher I could see what I was doing. Then I maneuvered the glass to where I could get that front roller in the track. Then. I carefully rolled the window up making sure that front roller did not come out if the track. Lastly I carefully got the rear roller in the track. I hoe I never have to do that again. Thanks for the help guys.
__________________
Dwayne |
|
|
Sponsored Links (Register now to hide all advertisements) |
|