The Ford Barn

cas3 · 11-29-2023, 12:53 AM

Fred bought a lot of stuff at my auction. No heater motors though!

Terry,OH · 05-03-2024, 07:23 AM

The logo pictured is not from a Hadees heater! They did have a logo which was a profile of the devils head.

To make a DC motor reverse rotation change voltage polarity on just the stator or just the rotor. Changing the polarity on both will result in no change of rotation. With the Ford original motor this was done through the switch.

ndnchf · 05-03-2024, 07:51 AM

I'm no expert on Hadees heaters, but I did restore one 6 or 7 years ago. Here are a couple other similar badges that say Hadees Heater on them.

kartrae7 · 05-03-2024, 08:12 AM

The easiest way i found to make this work. I used the two wire motor from napa, a 1941 switch with heat and defrost. Switch is marked with color dots from memory black is 6v, red and green are wires from motor, yellow is ground. The switch will change direction of the two wire leads to the motor giving you defrost and heat. Has to be run on 6v because the wire resistor will not live long on 12v. Mike

petehoovie · 05-03-2024, 10:53 AM

Quote:

Originally Posted by ndnchf

I'm no expert on Hadees heaters, but I did restore one 6 or 7 years ago. Here are a couple other similar badges that say Hadees Heater on them.

11-29-2023, 12:53 AM	#21
cas3 Senior Member Join Date: Jan 2011 Location: sw minnesota Posts: 4,591	Re: 6 Volt heater motor rebuild Fred bought a lot of stuff at my auction. No heater motors though!

05-03-2024, 07:23 AM	#22
Terry,OH Senior Member Join Date: May 2010 Posts: 4,771	Re: 6 Volt heater motor rebuild The logo pictured is not from a Hadees heater! They did have a logo which was a profile of the devils head. To make a DC motor reverse rotation change voltage polarity on just the stator or just the rotor. Changing the polarity on both will result in no change of rotation. With the Ford original motor this was done through the switch.

05-03-2024, 08:12 AM	#24
kartrae7 Junior Member Join Date: Mar 2012 Location: maryland Posts: 24	Re: 6 Volt heater motor rebuild The easiest way i found to make this work. I used the two wire motor from napa, a 1941 switch with heat and defrost. Switch is marked with color dots from memory black is 6v, red and green are wires from motor, yellow is ground. The switch will change direction of the two wire leads to the motor giving you defrost and heat. Has to be run on 6v because the wire resistor will not live long on 12v. Mike Last edited by kartrae7; 05-03-2024 at 08:17 AM.