11-07-2012, 08:15 AM | #1 |
Senior Member
Join Date: May 2010
Posts: 218
|
Water Pump
Are there any do's and don'ts on rebuilding a water pump, with a complete kit? Thanks in advance
|
11-07-2012, 02:28 PM | #2 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Water Pump
I always rebuild my pumps exactly as original, except for adding the rear bushing with a seal in the REAR of the bushing. Always use lead packing rings in the packing nut and put grease around the lead rings, or you'll have coolant drips. Unscrew the packing nut when you grease the rear bushing, so you don't put pressure on the rear seal. or pump grease into the coolant.
|
Sponsored Links (Register now to hide all advertisements) |
|
11-07-2012, 04:09 PM | #3 |
Senior Member
Join Date: Feb 2012
Location: London England
Posts: 908
|
Re: Water Pump
Buy the kit with the Staiinless steel shaft!! They don't wear out like the mild steel ones .I like to buy the extra long one as you can grind the end to take up the wear in the cylinder head.
John Cochran |
11-07-2012, 05:50 PM | #4 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Water Pump
Sponsored Links (Register now to hide all advertisements)
http://fordbarn.com/forum/showthread...+cleaning+mess |
|
|
Sponsored Links (Register now to hide all advertisements) |
|