|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-06-2015, 02:51 PM | #1 |
Senior Member
Join Date: Dec 2011
Posts: 180
|
I'm not rich but my Model A is !!
I have my the carb adjustment valve all the way off and according to my plugs, and my exhaust I seem to still be rich. What is wrong !!
|
11-06-2015, 04:02 PM | #2 |
Senior Member
Join Date: May 2010
Posts: 4,179
|
Re: I'm not rich but my Model A is !!
Prior to trying to investigate oversized jet problems, did you check to see if:
1. Your carburetor float level may be set too high? 2. Your GAV may be not seating properly and leaking? Last edited by H. L. Chauvin; 11-06-2015 at 04:02 PM. Reason: typo |
Sponsored Links (Register now to hide all advertisements) |
|
11-06-2015, 05:17 PM | #3 |
Senior Member
Join Date: May 2010
Location: Pace, FL near Pensacola
Posts: 374
|
Re: I'm not rich but my Model A is !!
If it hasn't already been done you may need to replace your jets with a set of flow tested jets from Renner's.
|
11-06-2015, 05:28 PM | #4 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: I'm not rich but my Model A is !!
If you are using an air filter you should also use a balance tube on the carb.
|
11-06-2015, 06:46 PM | #5 |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
Re: I'm not rich but my Model A is !!
sounds like carb rebuild time or just purchase one from berts whichever suits you best
are you setting the air bleed properly? Last edited by Mitch//pa; 11-06-2015 at 07:10 PM. |
11-08-2015, 06:57 PM | #6 |
Senior Member
Join Date: Dec 2011
Posts: 180
|
Re: I'm not rich but my Model A is !!
Sponsored Links (Register now to hide all advertisements)
|
11-08-2015, 07:08 PM | #7 |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
Re: I'm not rich but my Model A is !!
|
11-08-2015, 08:47 PM | #8 |
Senior Member
Join Date: Dec 2014
Location: Shawnee, Ok
Posts: 3,471
|
Re: I'm not rich but my Model A is !!
If you have an air cleaner on it try taking it off and see what happens.
I've had problems when the filter gets to dirty.
__________________
Keith Shawnee OK '31 SW 160-B |
|
|
Sponsored Links (Register now to hide all advertisements) |
|