|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-12-2020, 06:28 PM | #1 |
Junior Member
Join Date: Jun 2017
Posts: 22
|
Radiator shroud fit question
Has anyone had experience with installing the ‘28 shroud (original) with a reproduction radiator? The radiator in my 28 appears to be the low price version available from Mac’s. I’ve done a bunch of measuring and looks like the bottom tabs on the radiator are in the way- I’m curious if the tabs on an original or a Brassworks show quality radiator are in a different spot or orientation?
Thanks! |
04-12-2020, 06:36 PM | #2 |
Senior Member
Join Date: May 2010
Posts: 572
|
Re: Radiator shroud fit question
It’s been a while, but it was difficult aligning the shroud tabs on my radiator. I don’t know what brand the radiator is, but I gave up in the end and used black zip ties at the bottom.
|
Sponsored Links (Register now to hide all advertisements) |
|
04-12-2020, 07:32 PM | #3 |
Senior Member
Join Date: Feb 2014
Location: Florida - 32128
Posts: 416
|
Re: Radiator shroud fit question
The radiator had been replaced on my ‘28 Sport Coupe. I bought a new outer shroud. I had to trim (cut) the lower section a little bit adjusting it to fit in further- closer to the radiator, grind a small piece of each side of the lower radiator brackets and redrill the four mounting bolt holes. I still have not permanently mounted it back on again - I’m doing a complete body off. Things have pretty much stopped right now.
Dave |
04-12-2020, 07:39 PM | #4 |
Senior Member
Join Date: Feb 2014
Location: Florida - 32128
Posts: 416
|
Re: Radiator shroud fit question
Opps... l was refusing to the outer radiator chrome cover.
|
05-05-2020, 02:12 PM | #5 |
Member
Join Date: Jun 2010
Location: Paso Robles, People's Republic of CA
Posts: 82
|
Re: Radiator shroud fit question
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|