|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-08-2018, 05:26 PM | #1 |
Senior Member
Join Date: May 2010
Location: Plover, WI
Posts: 261
|
Curious of your preference
I was wondering what everyone's preference is regarding using the foot pedal accelerator or the lever on the steering column. I tend to use the foot pedal from a stop to get up to speed then switch to using the lever on the steering column. What are some other preferences. Was Henry Ford reluctant to give up the steering column accelerator lever used on the Model Ts?
|
09-08-2018, 05:35 PM | #2 |
Senior Member
Join Date: May 2010
Location: Clinton,WA/Whidbey Island
Posts: 4,105
|
Re: Curious of your preference
Pedal
__________________
www.whidbeymodelaclub.com |
Sponsored Links (Register now to hide all advertisements) |
|
09-08-2018, 05:59 PM | #3 |
Senior Member
Join Date: May 2010
Location: Portland OR
Posts: 6,342
|
Re: Curious of your preference
Most of the A's I have worked on, the detentes are worn to the point of no use and if spring is good on the bracket and weak on the lever shaft, the lever works it way back up. Foot feed
__________________
I know the voices aren't real but damn they have some good ideas! |
09-08-2018, 06:04 PM | #4 |
Senior Member
Join Date: Mar 2017
Location: Connecticut Shoreline
Posts: 1,824
|
Re: Curious of your preference
Use the foot pedal for driving. Use the steering column lever for starting only.
|
09-08-2018, 06:05 PM | #5 |
Senior Member
Join Date: May 2018
Location: Birch Bay WA
Posts: 190
|
Re: Curious of your preference
pedal / foot feed
|
09-08-2018, 06:31 PM | #6 |
Senior Member
Join Date: May 2010
Location: Central FL, USA
Posts: 1,138
|
Re: Curious of your preference
Sponsored Links (Register now to hide all advertisements)
Bob-A |
09-08-2018, 06:36 PM | #7 |
Member
Join Date: Nov 2015
Location: Grand Haven, MI
Posts: 95
|
Re: Curious of your preference
Pedal!
|
09-08-2018, 07:49 PM | #8 |
Senior Member
Join Date: May 2011
Location: Elyria, Ohio
Posts: 757
|
Re: Curious of your preference
Using the lever for driving looks like trouble to me!
Marty |
09-08-2018, 07:54 PM | #9 |
Senior Member
Join Date: Aug 2011
Location: Eagle Bend, MN
Posts: 2,025
|
Re: Curious of your preference
I use the hand throttle for cruising. Also use it to bring the RPM up a bit when its cold, then drop it again when I take off. Lower RPM makes for smoother shifting.
__________________
"There are some that can destroy an anvil with a teaspoon and shouldn't be allowed to touch anything resembling a tool." |
09-08-2018, 07:54 PM | #10 |
Senior Member
Join Date: May 2010
Location: Lakeland, MN
Posts: 310
|
Re: Curious of your preference
I’m with Bob-A. A little cruise control on the flatlands is nice...give the ol’ right foot a rest.
__________________
Jeff P./MN 1913 Model T Runabout 1926 Model T Sport Touring 1948 Chrysler New Yorker |
09-08-2018, 10:28 PM | #11 |
Member
Join Date: Mar 2017
Posts: 41
|
Re: Curious of your preference
I agree with Marty in Ohio. In modern cars there is an automatic throttle cancelation if you touch the brakes. Not so in our 90 year old cars. Accidents happen quickly & unexpectedly. No time to be playing with a hand throttle.
I use only the pedal except for while the car may be sitting in one place. |
09-08-2018, 10:34 PM | #12 | |
Senior Member
|
Re: Curious of your preference
Quote:
Could be, after years of using the column throttle it might have been easier for the T drivers.
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
|
09-08-2018, 11:16 PM | #13 |
Junior Member
Join Date: Aug 2018
Posts: 14
|
Re: Curious of your preference
The throttle on the steering column of a Model A Ford is really there so that the engine can be used as a stationary power plant. AA trucks and all versions of A cars share the same engine and controls. A AA truck with a power takeoff arranged to run a saw, a cement mixer, a water pump, or a generator would be very difficult to control if the column lever was not there. Henry made them all the same for ease of production. I prefer the foot pedal unless I am on a long trip with low risk of cruising interruptions. Then I use the column throttle as a form of ancient “Cruise Control.” I also use the throttle lever during a cold start. It serves as a fast idle until it runs smoothly. I prefer to drive with the lever up for normal driving an use my foot.
|
09-09-2018, 06:30 AM | #14 | |
Senior Member
Join Date: Jan 2018
Location: Tocumwal, NSW, Australia
Posts: 1,749
|
Re: Curious of your preference
Quote:
It's a personal choice. use what you are comfortable with.
__________________
I know many things, But I don't know everything, Sometimes I forget things. And there are times when I have a long memory. |
|
09-09-2018, 09:48 AM | #15 |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,520
|
Re: Curious of your preference
Since I own several Model-Ts and brass-era vehicles that only have a hand throttle, I enjoy using the hand throttle on a Model-A once I am in high gear. I do it simply to break the boredom while I am driving. Ford originally incorporated this feature because of the familiarity of his customers with the throttle lever. I think it would be a fair statement to say that today, most Model-T drivers can safely & efficiently drive a Model-A however most Model-A drivers cannot safely drive a Model-T. It likely boils down to familiarity.
|
09-09-2018, 10:20 AM | #16 |
Senior Member
Join Date: Aug 2018
Posts: 2,332
|
Re: Curious of your preference
Usually not flat enough here to use as a cruise control.
|
09-09-2018, 10:36 AM | #17 |
Senior Member
Join Date: May 2010
Posts: 702
|
Re: Curious of your preference
|
09-09-2018, 02:04 PM | #18 | |
Senior Member
Join Date: May 2010
Location: now Kuna, Idaho
Posts: 3,779
|
Re: Curious of your preference
Quote:
Hmmm, I don't think so. More is needed. There is too much variation in RPM between loaded and unloaded conditions. For example, running as saw. It takes very little throttle to run the saw at operating RPM without a load. Start sawing into an oak log and you may need full throttle to avoid killing the engine. Finish the cut at wide open throttle, and the engine will overspeed and soon kick out a rod. A load-sensing governor is needed to control RPM. I don't think Ford would put a hand throttle on millions of A's just for a relatively few industrial/farm uses. |
|
09-09-2018, 03:03 PM | #19 |
Senior Member
Join Date: Feb 2015
Location: Australia
Posts: 1,971
|
Re: Curious of your preference
On rough roads with sprung seats (especially RHD) the driver bounces goes up and off the pedal, and comes down onto the pedal, making rough roads much worse. Some say kangaroo juice.
The hand throttle keeps the speed constant. Good for driving down creek beds. Don't ask how I know. |
09-10-2018, 12:29 PM | #20 |
Senior Member
Join Date: Dec 2014
Location: Shawnee, Ok
Posts: 3,471
|
Re: Curious of your preference
Pedal
__________________
Keith Shawnee OK '31 SW 160-B |
|
|
Sponsored Links (Register now to hide all advertisements) |
|