The Ford Barn

hewe · 05-01-2017, 11:48 PM

I have a solution for axles gloved by seals wearing into them. I have sleeve that will give a new seal surface to the axle. For further information. Contact, Hugh Hunter at 604- 485- 4303 or email at hughhunt@ telus.net.

BRENT in 10-uh-C · 05-02-2017, 07:31 AM

Quote:

Originally Posted by hewe

I have a solution for axles gloved by seals wearing into them. I have sleeve that will give a new seal surface to the axle. For further information. Contact, Hugh Hunter at 604- 485- 4303 or email at hughhunt@ telus.net.

You have my attention in that regard. Are you willing to share your idea? Is this sleeve repair method something we would purchase from you??

hewe · 05-03-2017, 10:37 AM

Sponsored Links (Register now to hide all advertisements)

Yes I have had them made to fit the Model A axle. The seal area is 1.135 and stock sleeves do not fit this diameter. They are $35.00 each FOB here in Canada. I include instructions for installing them. We also have a sleeve for the Crank pulley. axles sleeve 1.jpg

05-01-2017, 11:48 PM	#1
hewe Member Join Date: Oct 2011 Location: Powell River B.C. Can. Posts: 96	Axle grooves repairs I have a solution for axles gloved by seals wearing into them. I have sleeve that will give a new seal surface to the axle. For further information. Contact, Hugh Hunter at 604- 485- 4303 or email at hughhunt@ telus.net.

05-03-2017, 10:37 AM	#3
hewe Member Join Date: Oct 2011 Location: Powell River B.C. Can. Posts: 96	Re: Axle grooves repairs Sponsored Links (Register now to hide all advertisements) Yes I have had them made to fit the Model A axle. The seal area is 1.135 and stock sleeves do not fit this diameter. They are $35.00 each FOB here in Canada. I include instructions for installing them. We also have a sleeve for the Crank pulley. axles sleeve 1.jpg