The Ford Barn

JM 35 Sedan · 12-15-2010, 01:23 PM

Hi, I am rebuilding an original '35 21 stud engine. I would like to use an aluminum press on type timing gear instead of a fiber gear. If someone has one they wish to sell, or knows where I can buy one, please send me a PM or post a response here. The condition could be either new or very good used. Thank you!

Folks, thanks to some great Fordbarners I now have all the early style aluminum press on type timing gears that I will ever need.

barnfind08 · 12-15-2010, 05:27 PM

Look in the for sale side on your request

twinjoan · 12-18-2010, 01:50 PM

I have NOS press on type aluminum timing gear. It has been well cared for. $75.00 plus shipping. Elmer Swift 805-646-6440 or 805-458-0128

FL&WVMIKE · 02-26-2011, 05:17 PM

Quote:

Originally Posted by JM 35 Sedan

bttt- I found and bought one but still looking for another. Must be aluminum. Thanks Fordbarners

JOHN ...................
I might have some of those, later this summer. I know it doesn't help you now. I have a friend, who has some and we have talked of him trading me some NOS Ford parts for some NOS Chevy parts that I have. It won't be before June.
MIKE

twinjoan · 03-01-2011, 02:27 PM

Reduce price on my alu8minum timing gear is $55.00 plus shipping. Elmer Swift, call to discuss 805-646-6440 or 805-458-0128

twinjoan · 03-11-2011, 09:02 PM

Sponsored Links (Register now to hide all advertisements)

John, I do not see your counter offer of $45.00 plus shipping. If you still want it, you are the winner. I'll get a figure on the shipping. Let me know if you still want it.

Elmer

JM 35 Sedan · 03-13-2011, 09:13 AM

Elmer, I will buy it for $45 + shipping. Please send me a pm with total cost and your address. Thank you, John

JM 35 Sedan · 03-18-2011, 07:44 AM

I'm still looking for one of these gears but it must be the aluminum press on type. Thanks fordbarn!
Never received follow up info from twinjoan on pm's that I sent him or the above post that I made to him.

barnfind08 · 03-18-2011, 09:59 AM

I still have the gear for 50.00 if you want it?

JM 35 Sedan · 03-19-2011, 09:30 AM

Quote:

Originally Posted by barnfind08

I still have the gear for 50.00 if you want it?

I just sent you a PM. The timing gears you offered to me before were fiber. You were going to notify me if/when you did find the aluminum gear(s) that you had. Never heard back from you until you posted this message on my want ad. Exactly what type of gear do you have for sale? Can you send me a digital picture of this gear? Thanks, John

barnfind08 · 03-19-2011, 05:09 PM

Can not send a picture, but the part number is 81b-6256 Aluminum gear press-on.

JM 35 Sedan · 03-26-2011, 01:48 PM

Still looking for a 44 tooth, RH helix, Ford pn 81B-6256 A, std. size, aluminum press on cam/timing gear. I have recieved prices from $45 to $75 for gears that in most cases were not what I am looking for. I will pay $45 + cost of shipping for the gear listed above. Thanks Ford Barner's

perrysmith · 03-29-2011, 01:49 PM

I have two NOS (apparently, no visable wear). They are $55 each plus shipping firm. Send email to [email protected]., if you want a picture. I see you have had
quite a time coming up with one, so there will be no excuses here!

JM 35 Sedan · 03-29-2011, 10:10 PM

Perry, I had no problem finding the first of two gears that I need thanks to Mac Van Pelt. The second one has been the search from hell. The pm you sent me said your gears are bolt on. I need press on type. I'm willing to pay up to $45 plus cost of shipping for the gear I need.

JM 35 Sedan · 04-03-2011, 09:50 AM

Still looking for a 44 tooth, RH helix, Ford pn 81B-6256 A, std. size, aluminum press on the cam type timing gear. I have recieved prices from $45 to $75 for gears that in most cases were not what I am looking for. I am willing to pay $45 + cost of shipping for the gear listed above. Thanks Ford Barner's

JM 35 Sedan · 06-17-2011, 11:10 AM

Still looking for a 44 tooth, RH helix, Ford pn 81B-6256 A, std. size, aluminum press on the cam type timing gear. I have recieved prices from $45 to $75 for gears that in most cases were not what I am looking for. I am willing to pay $45 + cost of shipping for the gear listed above. Thanks Ford Barner's

JM 35 Sedan · 07-07-2011, 02:44 PM

Found and bought one, still looking for another. Must be 44 tooth, RH helix, Ford pn 81B-6256 A, std. size, aluminum press onto the cam type timing gear.

Thanks Fordbarn!

Galen Lee · 08-26-2011, 09:25 PM

I have it, Ford script 44 tooth, new gear
$70.00 plus shipping
Galen Lee
320.286.2036

JM 35 Sedan · 11-11-2011, 02:18 PM

Folks, thanks to some great Fordbarners I now have all the early style aluminum press on type timing gears that I will ever need.

12-15-2010, 01:23 PM	#1
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,858	Aluminum Timing Gear, Press On Type City: Northeastern State: MD Hi, I am rebuilding an original '35 21 stud engine. I would like to use an aluminum press on type timing gear instead of a fiber gear. If someone has one they wish to sell, or knows where I can buy one, please send me a PM or post a response here. The condition could be either new or very good used. Thank you! *Folks, thanks to some great Fordbarners I now have all the early style aluminum press on type timing gears that I will ever need.* __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein* Last edited by JM 35 Sedan; 11-11-2011 at 02:19 PM.

12-15-2010, 05:27 PM	#2
barnfind08 Senior Member Join Date: May 2010 Posts: 893	Re: Aluminum Timing Gear, Press On Type Look in the for sale side on your request

12-18-2010, 01:50 PM	#3
twinjoan Senior Member Join Date: May 2010 Posts: 2,426	Re: Aluminum Timing Gear, Press On Type I have NOS press on type aluminum timing gear. It has been well cared for. $75.00 plus shipping. Elmer Swift 805-646-6440 or 805-458-0128

03-01-2011, 02:27 PM	#5
twinjoan Senior Member Join Date: May 2010 Posts: 2,426	Re: Aluminum Timing Gear, Press On Type Reduce price on my alu8minum timing gear is $55.00 plus shipping. Elmer Swift, call to discuss 805-646-6440 or 805-458-0128

03-11-2011, 09:02 PM	#6
twinjoan Senior Member Join Date: May 2010 Posts: 2,426	Re: Aluminum Timing Gear, Press On Type Sponsored Links (Register now to hide all advertisements) John, I do not see your counter offer of $45.00 plus shipping. If you still want it, you are the winner. I'll get a figure on the shipping. Let me know if you still want it. Elmer

03-13-2011, 09:13 AM	#7
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,858	Re: Aluminum Timing Gear, Press On Type Elmer, I will buy it for $45 + shipping. Please send me a pm with total cost and your address. Thank you, John __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein*

03-18-2011, 07:44 AM	#8
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,858	Re: Aluminum Timing Gear, Press On Type I'm still looking for one of these gears but it must be the aluminum press on type. Thanks fordbarn! *Never received follow up info from twinjoan on pm's that I sent him or the above post that I made to him.* __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein*

03-18-2011, 09:59 AM	#9
barnfind08 Senior Member Join Date: May 2010 Posts: 893	Re: Aluminum Timing Gear, Press On Type I still have the gear for 50.00 if you want it?

03-19-2011, 05:09 PM	#11
barnfind08 Senior Member Join Date: May 2010 Posts: 893	Re: Aluminum Timing Gear, Press On Type Can not send a picture, but the part number is 81b-6256 Aluminum gear press-on.

03-26-2011, 01:48 PM	#12
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,858	Re: Aluminum Timing Gear, Press On Type Still looking for a *44 tooth, RH helix, Ford pn* 81B-6256 A, std. size, aluminum press on cam/timing gear. I have recieved prices from $45 to $75 for gears that in most cases were not what I am looking for. I will pay $45 + cost of shipping for the gear listed above. Thanks Ford Barner's __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein* Last edited by JM 35 Sedan; 03-28-2011 at 10:03 AM.

03-29-2011, 01:49 PM	#13
perrysmith Senior Member Join Date: May 2010 Posts: 285	Re: Aluminum Timing Gear, Press On Type I have two NOS (apparently, no visable wear). They are $55 each plus shipping firm. Send email to [email protected]., if you want a picture. I see you have had quite a time coming up with one, so there will be no excuses here!

03-29-2011, 10:10 PM	#14
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,858	Re: Aluminum Timing Gear, Press On Type Perry, I had no problem finding the first of two gears that I need thanks to Mac Van Pelt. The second one has been the search from hell. The pm you sent me said your gears are bolt on. I need press on type. I'm willing to pay up to $45 plus cost of shipping for the gear I need. __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein* Last edited by JM 35 Sedan; 03-29-2011 at 10:19 PM.

04-03-2011, 09:50 AM	#15
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,858	Re: Aluminum Timing Gear, Press On Type Still looking for a *44 tooth, RH helix, Ford pn* 81B-6256 A, std. size, aluminum press on the cam type timing gear. I have recieved prices from $45 to $75 for gears that in most cases were not what I am looking for. I am willing to pay $45 + cost of shipping for the gear listed above. Thanks Ford Barner's __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein*

06-17-2011, 11:10 AM	#16
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,858	Re: Aluminum Timing Gear, Press On Type Still looking for a *44 tooth, RH helix, Ford pn* 81B-6256 A, std. size, aluminum press on the cam type timing gear. I have recieved prices from $45 to $75 for gears that in most cases were not what I am looking for. I am willing to pay $45 + cost of shipping for the gear listed above. Thanks Ford Barner's __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein*

07-07-2011, 02:44 PM	#17
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,858	Re: Aluminum Timing Gear, Press On Type Found and bought one, still looking for another. Must be 44 tooth, RH helix, Ford pn 81B-6256 A, std. size, aluminum press onto the cam type timing gear. Thanks Fordbarn! __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein*

08-26-2011, 09:25 PM	#18
Galen Lee Member Join Date: Aug 2011 Location: Cokato, MN Posts: 95	Re: Aluminum Timing Gear, Press On Type I have it, Ford script 44 tooth, new gear $70.00 plus shipping Galen Lee 320.286.2036

11-11-2011, 02:18 PM	#19
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,858	Re: Aluminum Timing Gear, Press On Type *Folks, thanks to some great Fordbarners I now have all the early style aluminum press on type timing gears that I will ever need.* __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein*