The Ford Barn

Busguy71 · 10-24-2012, 03:36 PM

Sponsored Links (Register now to hide all advertisements)

Email [email protected] if interested

I've been collecting parts to build a model A hot rod for a while now. I have the frame, radiator and shell, 2 front front axles and some steering linkage, split wishbones, a VW steering box and column, a set of 1935 16" wire wheels, Dana 44 rear end with 5.5" spacing, stock seat stanchion, stock rear spring and frame has stock rear crossmember., stock dash cluster, the cowl is from a Briggs bodied sedan. $750

I have a buick 455/400 with combo with driveshaft that could be used in this project for another $500.

I also have a 1960 Cadillac 390/auto combo with driveshaft that could be used in this project for another $500.

10-24-2012, 03:36 PM	#1
Busguy71 Junior Member Join Date: Aug 2011 Location: CT Posts: 8	30-31 Ford hot-rod project City: E. Hampton State: CT Sponsored Links (Register now to hide all advertisements) Email [email protected] if interested I've been collecting parts to build a model A hot rod for a while now. I have the frame, radiator and shell, 2 front front axles and some steering linkage, split wishbones, a VW steering box and column, a set of 1935 16" wire wheels, Dana 44 rear end with 5.5" spacing, stock seat stanchion, stock rear spring and frame has stock rear crossmember., stock dash cluster, the cowl is from a Briggs bodied sedan. $750 I have a buick 455/400 with combo with driveshaft that could be used in this project for another $500. I also have a 1960 Cadillac 390/auto combo with driveshaft that could be used in this project for another $500.