04-06-2012, 06:44 PM | #1 |
Member
Join Date: May 2010
Posts: 40
|
Dovetail Help!
Maybe someone can guide me on installing these dovetails. All I had was a
little bit of dried rubber in the doors, scraped it clean. Recieved the new pieces today from Mac's. One pc of rubber is too small, two pcs are too big for the door pocket. Clue me in before I start cutting! Rich |
04-06-2012, 07:52 PM | #2 |
Senior Member
Join Date: May 2010
Location: santa cruz, calif
Posts: 2,011
|
Re: Dovetail Help!
no doubt your parts came in a Vintique package. The rubber is too large. You will have to trim it and lube it with soap or wd40 to get it on there. Grinding it is easier than cutting it. It will grind better cold or even frozen. Heres a link to Marcos post with photos
http://fordbarn.com/forum/showthread...273#post169273 search "dovetail rubber"on this forum and you will find others experiences helpful |
Sponsored Links (Register now to hide all advertisements) |
|
04-06-2012, 08:24 PM | #3 |
Member
Join Date: May 2010
Posts: 40
|
Re: Dovetail Help!
Sponsored Links (Register now to hide all advertisements)
late 31 units. These will proably work with 'grinding' though. Thank's, Rich |
|
|
Sponsored Links (Register now to hide all advertisements) |
|